8. Mechanical Disassembly

8-1) Refrigerator Disassembly

Control Panel

1.Insert a flat-blade screwdriver on the slot as shown, and unlock the tabs.

2.Disconnect the wire connector in the back of control panel.

Door Handle

The door handles allow access into the refrigerator and freezer. They are front mounted with Phillips head screws.

1.With a small flat-blade screwdriver, press the small button and pull handle cover out.

2.Remove the Phillips screws (8).

3.Lift the handle with an in and upward motion until it disengages the locking tabs. Pull the handle outward to remove it.

Button

Beverage StationTM

The beverage stationTM allows access to the refrigerator without opening the refrigerator door.

1.Open the door beverage stationTM

2.With a small flat-blade screwdriver,take out the rubbercap, then put it into the small hole and push the button inside.

3.Take off its door.

Door Gasket

The door gasket is a molded gasket set into a channel located in the door liner.

1.Open the door.

2.Grasp the gasket and pull in an outward motion until the molded gasket separates from the door liner.

14

Page 14
Image 14
Samsung RS2622, RS2544, RS2666, RS2777 manual Control Panel, Door Handle, Beverage StationTM, Door Gasket