Cisco Systems 78-17630-01 appendix Pluggable Port Module

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Multirate Cards

Table D-22			Field Descriptions for the Pluggable Provisioning Tab (continued)
	Field			Description
	Actual Equipment Type			Displays the actual pluggable I/O module that is installed in the pluggable slot.
	Firmware Version			Displays the revision number of the software used by the ASIC chip installed on the pluggable
				I/O module.
	User Code			Allows you to enter an ASCII string to identify the pluggable I/O module. The user code is
				stored in nonvolatile memory so that it is not lost when the unit is moved or stored as a spare.
	Product ID			Displays a product ID string of 63 characters maximum. If the pluggable I/O module does not
				support the product ID, the field shows N/A.
	Version ID			Displays a version ID string in the format “V99_.” The version ID always begins with a V and
				ends with a space. If the card does not support the version ID, the field shows N/A.
	Administration State			The port administration state. It can be:
				•	IS—In Service.
				• IS, AINS—Automatic In Service.
				• OOS, DSBLD—Out of Service, Disabled.
				• OOS, MT—Out of Service, Maintenance.
	Service State			Overall availability of the entity. Values are:
				•	IS_NR—In Service–Normal.
				•	OOS_AU—Out of Service–Autonomous.
				•	OOS_MA—Out of Service–Management.
				• OOS_AUMA—Out of Service–Autonomous and Management.
				In addition, a secondary state provides additional information about the status of the entity.
				Values for secondary state are:
				• MEA—Mismatch of equipment due to invalid equipment insertion.
				• UEQ—Unequipped. There is nothing in the slot.
				• UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
				• SWDL—Software download in progress.
				• MT—Maintenance, as per the Admin State change.
				•	AINS—Automatic In Service.
				• DSBLD—Traffic is disabled on the entity.
				• LPBK—Port or connection has a loopback on it.
				• FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment
					and ports in FLT state should be cleared as they transition. Transition states are listed in
					Table 11-10 on page 11-15.
				See Table 11-10 on page 11-15for the Service state/Secondary state possible values.
				Note If the NE release does not support the Service state, this field shows N/A.
	Equipment State			Displays the equipment state of the pluggable I/O module.
	Pluggable Port Module
	Pluggable Number			Displays the identifier of the plugin module.
		Cisco Transport Manager Release 7.2 User Guide
	D-20				78-17630-01