Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

D.4.22.9 J1 Path Trace Tab

 

The J1 Path Trace tab allows you to view and retrieve STM-64 LH 1550 J1 path trace information.

Table D-231

Field Descriptions for the J1 Path Trace Tab

 

 

 

Field

 

Description

 

 

 

Port Number

 

Displays the port number.

 

 

 

STS Number

 

Displays the STS number.

 

 

 

Expected String

 

Displays the current expected string.

 

 

 

Received String

 

Displays the current received string.

 

 

 

Mode

 

Displays the path trace mode (Off/None, Auto, or Manual).

 

 

 

C2

 

Represents a machine-generated J1/J2 payload label byte.

 

 

 

Mismatch

 

Indicates whether there is a mismatch in the C2 byte received.

 

 

 

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.23 Slot Properties—STM-64 LR/LH 4 (ONS 15600 SDH)

The Slot Properties pane displays information about the Cisco ONS 15600 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The STM-64 LR/LH 4 port 1550 card provides 4 long-haul STM-64 ITU-T G.9691 L-64.2c compliant signals. The ports operate at the ITU-T G.707 compliant 9953.28 Mbps rate over a single-mode fiber span. The card has four physical connector adapters with 2 fibers per connector adapter. The card VC4 payloads and concatenated payloads at VC4, VC4-4c, VC4-8c, VC4-16c, or VC-64c signal levels.

For the STM-64 LR/LH 4 module, the Slot Properties pane displays the following tabs: Module View, Identification, Line, VC-4, Loopback, Transceiver, Protection, Alarm Behavior, and J1 Path Trace.

D.4.23.1 Module View Tab

The Module View tab displays a graphic of the STM-64 LR/LH 4 that is installed in the slot. The number of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the card.

D.4.23.2 Identification Tab

The Identification tab allows you to view and update STM-64 LR/LH 4 identification information.

 

 

Cisco Transport Manager Release 7.2 User Guide

 

 

 

 

 

 

 

78-17630-01

 

 

D-205

 

 

 

 

 

Page 205
Image 205
Cisco Systems 78-17630-01 appendix Slot Properties-STM-64 LR/LH 4 ONS 15600 SDH, 22.9 J1 Path Trace Tab, 205