Cisco Systems 78-17630-01 appendix Slot Properties-OC192/STM64 XFR-Based, Module View Tab

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.4 Slot Properties—OC192/STM64 XFR-Based

The Slot Properties pane displays information about the Cisco ONS 15454 SONET and ONS 15454 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The OC-192/STM64 XFR-based card is an OC-192/STM-64 card based on XFP optics for use in ONS 15454 SONET or ONS 15454 SDH shelves. It is a one-base OC-192/STM-64 board that can be used with SR, IR, or LR XFP optics modules.

For the OC192/STM64 XFR-based module, the Slot Properties pane displays the following tabs: Module View, Identification, Pluggable Provisioning, Line, VC-4, STS, Loopback, Protection, Alarm Behavior, Transceiver, Auto Laser Shutdown, Section Trace, J1 Path Trace, and Info.

D.4.4.1 Module View Tab

		The Module View tab displays a graphic of the OC192/STM64 XFR-based card that is installed in the
		slot. The number of critical, major, minor, and warning alarms for the module is displayed under Alarm
		Status. (Alarms are also displayed when you move the mouse pointer over the graphic.) The Suppress
		Alarms check box is read-only and indicates whether all alarms are suppressed for the card and its
		port(s). Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the
		card.
D.4.4.2 Identification Tab
		The Identification tab allows you to view and update OC192/STM64 XFR-based card identification
		information.
Table D-106		Field Descriptions for the Identification Tab
	Field		Description
	Equipment Type		Displays the equipment type that the slot is provisioned for.
	Actual Equipment Type		Displays the actual card that is installed in the slot.
	Hardware Part Number		Displays the card part number that is printed on the top of the card.
	Hardware Revision		Displays the hardware revision number.
	Serial Number		Displays the card serial number that is unique to each card.
	CLEI Code		Displays the CLEI code.
	Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
	Product ID		Displays a product ID string of 63 characters maximum. If the card does not support the
			product ID, the field shows N/A.
	Version ID		Displays a version ID string in the format “V99_.” The version ID always begins with a V and
			ends with a space. If the card does not support the version ID, the field shows N/A.
			Cisco Transport Manager Release 7.2 User Guide
	78-17630-01			D-93