Cisco Systems 78-17630-01 appendix Line Tab, 182

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

For the STM-16 module, the Slot Properties pane displays the following tabs: Module View, Identification, Line, VC-4, Loopback, Transceiver, Protection, Alarm Behavior, and J1 Path Trace.

D.4.18.1 Module View Tab

	The Module View tab displays a graphic of the STM16 that is installed in the slot. The number of critical,
	major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are also
	displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is
	read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking the
	graphic opens a shortcut menu that you can use to reset, delete, or change the card.
D.4.18.2 Identification Tab
	The Identification tab allows you to view and update STM-16 identification information.
Table D-201	Field Descriptions for the Identification Tab
Field		Description
Equipment Type		Displays the equipment type the slot is provisioned for.
Actual Equipment Type		Displays the actual card that is installed in the slot.
Hardware Part Number		Displays the card part number that is printed on the top of the card.
Hardware Revision		Displays the hardware revision number.
Serial Number		Displays the card serial number that is unique to each card.
CLEI Code		Displays the CLEI code.
Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
User Code		Allows you to enter an ASCII string to identify the card. The user code is stored in nonvolatile
		memory so that it is not lost when the unit is moved or stored as a spare.
Product ID		Displays a product ID string of 63 characters maximum. If the card does not support the product
		ID, the field shows N/A.
Version ID		Displays a version ID string in the format “V99_.” The version ID always begins with a V and ends
		with a space. If the card does not support the version ID, the field shows N/A.
Equipment State		Displays the equipment state of the card.
Alarm Profile		Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all alarms
		for this card and its port(s).
D.4.18.3 Line Tab

The Line tab allows you to view and update STM-16 line performance monitoring information.

Table D-202 Field Descriptions for the Line Tab

Field

Description

Line Config

Port Number		Displays the optical port number.
Port Name		Allows you to enter an optical port name.
	Cisco Transport Manager Release 7.2 User Guide
D-182	78-17630-01