Cisco Systems 78-17630-01 appendix Line Thresh 15 Min Subtab

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Multirate Cards

Table D-23 Field Descriptions for the Line Config Subtab (continued)

Field	Description
Reach	Allows you to provision the reach value. You can choose Auto Provision, which allows
	the system to automatically provision the reach from the PPM reach value on the
	hardware. Choose one of the following reach distances:
	Note The reach distances options that appear in the drop-down list depend on the card
		selected.
	• SR (short reach, up to 2km distance)
	• SR 1 (up to 2km distance)
	• IR 1 (intermediate reach, up to 15km distance)
	• IR 2 (up to 40kmm distance)
	• LR 1 (long reach, up to 40km distance)
	• LR 2 (up to 80km distance)
	• LR 3 (up to 80km distance)
	•	I1
	•	S1
	•	S2
	•	L1
	•	L2
	•	L3
	• SX (up to 550m or 270m distance based on 50um/62.5um diameter fiber)
	• LX (up to 10km or 550m distance based on 50um/62.5um diameter fiber)
	•	CX
	•	T
	• DX (up to 40km distance)
	• HX (up to 40km distance)
	• ZX (up to 80km distance)
	• VX (up to 100km distance)
Wavelength	Allows you to provision the wavelength frequency.
AINS Soak (H:M)	Automatic in-service soak. The determination of duration left before the
	traffic/termination transitions to IS state.
AINS Soak Count Down (H:M)	Automatic in-service soak countdown. Displays the remaining time of valid input signal
	in hh:mm, after which the card becomes in service (IS) automatically.

D.3.1.4.2 Line Thresh 15 Min Subtab

The Line Thresh 15 Min subtab allows you to view and change the 15-minute near- and far-end line thresholds of the ASAP_4 card.

	Cisco Transport Manager Release 7.2 User Guide
D-24	78-17630-01