Appendix D Slot Property
Transponder Cards
Table | Field Descriptions for the Identification Tab (continued) | |
|
|
|
Field |
| Description |
|
|
|
Slot ID |
| Displays the identification number of the slot containing the transponder. |
|
| |
Software Version | Displays the version of the software running on the module. | |
|
|
|
BIOS Version |
| Displays the version number of the BIOS. |
|
| |
Board Serial Number | Displays the serial number of the board. | |
|
|
|
SCC Number |
| Displays the version of the module serial communication controller (SCC). |
|
|
|
Product Option |
| Displays the product option. Displays “Not Available” if TL1 Agent version is earlier than version |
|
| 2.1. |
|
| |
Hardware Version | Displays the version of the hardware. Displays “Not Available” if TL1 Agent version is earlier than | |
|
| version 2.1. |
|
|
|
Line Direction |
| Shows the line direction for the transponder. |
|
|
|
State |
| Allows you to place the transponder in one of two states: In Service or Under Maintenance. |
|
| |
PM Collection Status | Allows you to enable or disable PM data collection for the transponder. | |
|
|
|
D.5.3.3 Temperature Tab
The Temperature tab allows you to assign thresholds and alarm severities for the transponder laser.
Table
Field | Description |
|
|
Value | When the Update button is clicked, displays the current temperature of the transponder laser. |
|
|
Low | Sets the low temperature threshold (in degrees Celsius) and the alarm severity level. |
|
|
High | Sets the high temperature threshold (in degrees Celsius) and the alarm severity level. |
|
|
D.5.3.4 Current Tab
| The Current tab allows you to assign thresholds and alarm severities for the transponder laser current |
| levels. |
Table | Field Descriptions for the Current Tab |
|
|
Field | Description |
|
|
Value | When the Update button is clicked, displays the current value of the laser current. |
|
|
Degrade | Sets the degrade threshold for the laser current (in mA) and the alarm severity level. |
|
|
Fail | Sets the failure threshold for the laser current (in mA) and the alarm severity level. |
|
|
D.5.3.5 Power Tab
The Power tab allows you to assign thresholds and alarm severities for the transponder Laser 1 power levels.
| Cisco Transport Manager Release 7.2 User Guide |
|
