Appendix D Slot Property
Optical Cards
D.4.8.7 Alarm Behavior Tab
|
| The Alarm Behavior tab allows you to view and update OC48 IR 1310 alarm profile information. |
Table | Field Descriptions for the Alarm Behavior Tab | |
|
|
|
Field |
| Description |
|
|
|
Alarm Profile |
| Displays the alarm profile that has been configured for the card. |
|
| |
Suppress Alarms | If checked, indicates that all alarms are suppressed for the card. | |
|
|
|
Port Number |
| Displays the card port number. |
|
|
|
Alarm Profile |
| Choose an alarm profile for the port from the |
|
| customized alarm profile. |
|
| |
Suppress Alarms | If checked, all alarms are suppressed for the port. | |
|
|
|
Alarm Profile |
| Choose an alarm profile for all ports. |
|
| |
Force to All Ports | When clicked, forces all the ports to the selected alarm profile. | |
|
|
|
D.4.8.8 Auto Laser Shutdown Tab
|
| The Auto Laser Shutdown tab allows you to view and update OC48 IR 1310 ALS parameters. | |
Table | Field Descriptions for the Auto Laser Shutdown Tab | ||
|
|
|
|
Field |
|
| Description |
|
|
|
|
Port No. |
|
| Displays the port number. |
|
|
|
|
ALS Mode |
|
| Displays the ALS mode (Disabled, Auto Restart, Manual Restart, or Manual Restart for Test). |
|
|
| |
Rec. Pulse Dur. (sec) |
| Allows you to set the received laser pulse duration, in seconds. The range is 2.0 to 100.0 seconds. | |
|
|
| |
Rec. Pulse Int. (sec) |
| Allows you to set the received laser pulse interval, in seconds. The range is 60 to 300 seconds. | |
|
|
|
|
Status |
|
| Displays the current laser status. Values are Shutdown or Not Shutdown. |
|
|
|
|
Request Restart |
|
| If selected, it allows you to request a laser restart. This parameter is configurable only when the |
|
|
| ALS mode is set to Manual Restart or Manual Restart for Test and when the laser status is Shut |
|
|
| Down. |
|
|
|
|
D.4.8.9 J1 Path Trace Tab
The J1 Path Trace tab allows you to view and update OC48 IR 1310 J1 path trace information.
Note This tab is not available on ONS 15327 OC48 IR 1310 cards.
Note The OC48_AS card supports J1 path trace, but the OC48 card does not.
| Cisco Transport Manager Release 7.2 User Guide |
|
