Table D-99 | Field Descriptions for the Line Tab (continued) |
| | | |
| Field | | Description |
| | |
| Service State | Displays the service state: |
| | | | | • | IS_NR—In Service–Normal. |
| | | | | • | OOS_AU—Out of Service–Autonomous. |
| | | | | • | OOS_MA—Out of Service–Management. |
| | | | | • OOS_AUMA—Out of Service–Autonomous and Management. |
| | | | | In addition, a secondary state provides additional information about the status of the entity. Values |
| | | | | for secondary state are: |
| | | | | • MEA—Mismatch of equipment due to invalid equipment insertion. |
| | | | | • UEQ—Unequipped; there is nothing in the slot. |
| | | | | • UAS—Unassigned; the entity does not exist, has not been created, or has been deleted. |
| | | | | • SWDL—Software download in progress. |
| | | | | • MT—Maintenance, as per the Admin State change. |
| | | | | • | AINS—Automatic in service. |
| | | | | • DSBLD—Traffic is disabled on the entity. |
| | | | | • LPBK—Port or connection has a loopback on it. |
| | | | | • FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and |
| | | | | | ports in FLT state should be cleared as they transition. Transition states are listed in Table 11-10 |
| | | | | | on page 11-15. |
| | | | | See Table 11-10 on page 11-15for the Service state/Secondary state possible values. |
| | | | | Note If the NE does not support the Service State, this field shows N/A. |
| | | |
| AINS Soak | | Automatic in-service soak. The determination of duration left before the traffic/termination |
| | | | | transitions to IS state. |
| | |
| AINS Soak Count | Automatic in-service soak countdown. Displays the remaining time of valid input signal in hh:mm, |
| Down | | after which the card becomes in service (IS) automatically. |
| | | |
| ALS Mode | | Displays the ALS mode (Disabled, Auto Restart, Manual Restart, or Manual Restart for Test). |
| | | | |
| Line Threshold 15 Minutes | | | |
| | | |
| Port Number | | The optical port number |
| | | |
| ES-L | | Errored seconds–line |
| | | |
| SES-L | | Severely errored seconds–line |
| | | |
| CV-L | | Coding violations–line |
| | | |
| UAS-L | | Unavailable seconds–line |
| | | |
| FC-L | | Failure count–line |
| | | |
| PSC | | Protection switching count—Near-end only |
| | | |
| PSD | | Protection switching duration—Near-end only |
| | | |
| PSC-W | | Protection switching count—working |
| | | |
| PSD-W | | Protection switching duration—working |
| | | |
| PSC-S | | Protection switching count—span |
| | | | | |
| | | | Cisco Transport Manager Release 7.2 User Guide |
| | | |
| D-88 | | | | | 78-17630-01 | |
| | | | | |
