D-7
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards FMEC Cards

D.1.1.9 Info Tab

The Info tab allows you to view nominal operating values set during manufacturing for the FC_MR-4
card.
Note See Table1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.2 FMEC Cards
This section describes the following FMEC cards supported within CTM:
•D.2.1 Slot Properties—FMEC-DS-1/E1, page D-8
•D.2.2 Slot Properties—FMEC-DS-3/E3, page D-8
•D.2.3 Slot Properties—FMEC-E1, page D-9
•D.2.4 Slot Properties—FMEC-E1-120NP, page D-11
•D.2.5 Slot Properties—FMEC-STM1E 1:1, page D-12
•D.2.6 Slot Properties—MIC-A/P, page D-15
•D.2.7 Slot Properties—MIC-C/T/P, page D-16
TableD-9 Field Descriptions for the GBIC Inventory Tab
Field Description
Port Number Displays the GBIC card port number.
Equipment Type Displays the equipment type the slot is provisioned for.
Actual Equipment Type Displays the actual card that is installed in the slot. Values are single mode or multimode.
Hardware Part Number Displays the manufacturer's part number.
Hardware Revision Displays the hardware revision number.
Serial Number Displays the GBIC serial number that is unique to each GBIC.
CLEI Code Displays the CLEI code.
Application Filename The application filename is not supported; therefore, this field displays “unknown.”
TableD-10 Field Descriptions for the Info Tab
Field Description
Extended Manufacturing Information
Attribute Displays the nominal card specification.
Value Displays the value of the attribute.