Cisco Systems 78-17630-01 appendix Slot Properties-MIC-A/P, Module View Tab

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

FMEC Cards

D.2.6 Slot Properties—MIC-A/P

The Slot Properties pane displays information about the Cisco ONS 15454 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The MIC-A/P card provides connection for the BATTERY B input, one of the two possible redundant power supply inputs. It also provides connection for eight alarm outputs (coming from the TCC2 card), sixteen alarm inputs, and four configurable alarm inputs/outputs. Its position is in slot 23 in the center of the ONS 15454 SDH subrack EFCA area.

For the MIC-A/P module, the Slot Properties pane displays the following tabs: Module View and Identification.

D.2.6.1 Module View Tab

	The Module View tab displays a graphic of the MIC-A/P that is installed in the slot. The number of
	critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are
	also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is
	read-only and indicates whether all alarms are suppressed for the card and its port(s).
D.2.6.2 Identification Tab
	The Identification tab allows you to view and update MIC-A/P identification information.
Table D-19	Field Descriptions for the Identification Tab
Field		Description
Equipment Type		Displays the equipment type the slot is provisioned for.
Actual Equipment Type		Displays the actual card that is installed in the slot.
HW Part Number		Displays the card part number that is printed on the top of the card.
Hardware Revision		Displays the hardware version number of the card.
Serial Number		Displays the card serial number that is unique to each card.
CLEI Code		Displays the CLEI code.
Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
Product ID		Displays a product ID string of 63 characters maximum. If the card does not support the
		product ID, the field shows N/A.
Version ID		Displays a version ID string in the format “V99_.” The version ID always begins with a V and
		ends with a space. If the card does not support the version ID, the field shows N/A.
Equipment State		Displays the equipment state of the card.
Alarm Profile		Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all
		alarms for this card and its port(s).

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-15