Cisco Systems 78-17630-01 appendix Slot Properties-LEM-10-B1, 225

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Table D-262	Field Descriptions for the Power Tab
Field	Description
Value	When the Update button is clicked, displays the current power of Laser 1.
Low	Sets the low threshold for the laser power (in mW) and the alarm severity level.
High	Sets the high threshold for the laser power (in mW) and the alarm severity level.

D.5.3.6 Input Power Tab

	The Input Power tab allows you to assign thresholds and alarm severities for the power coming into the
	transponder.
Table D-263	Field Descriptions for the Input Power Tab
Field	Description
Value	When the Update button is clicked, displays the current transponder input power.
Low	Sets the low threshold for the module input power in dBm and the alarm severity level.
High	Sets the high threshold for the module input power (in dBm) and the alarm severity level.

D.5.3.7 Output Power Tab

	The Output Power tab allows you to assign thresholds and alarm severities for the transponder output
	power.
Table D-264	Field Descriptions for the Output Power Tab
Field	Description
Value	When the Update button is clicked, displays the current transponder output power.
Low	Sets the low threshold for the transponder output power (in dBm) and the alarm severity level.
High	Sets the high threshold for the transponder output power (in dBm) and the alarm severity level.

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.5.4 Slot Properties—LEM-10-B1

The Slot Properties pane displays information about the Cisco ONS 15800 or ONS 15801 module that is installed in the slot selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

Line extender modules (LEMs) extend transmission distances in ONS 15800 or ONS 15801 regeneration and optical add/drop multiplexing (OADM) sites.

A block diagram is shown is the following figure.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-225