D-229
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards Transponder Cards

D.5.4.8 Output Power Tab

The Output Power tab allows you to assign performance monitoring thresholds for the transponder
output power.
Note See Table1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.5.5 Slot Properties—LEM-10G-Nxx
The Slot Properties pane displays information about the Line Extender Module–10 Gbps–Normal
(LEM-10G-Nxx)that is installed in the slot selected in the NE Explorer tree. Use this properties pane to
change the module performance monitoring thresholds.
Line extender modules (LEMs) extend transmission distances in Cisco ONS 15800 or ONS 15801
regeneration and optical add/drop multiplexing (OADM) sites.
A block diagram is shown in the following figure.
FigureD-11 Cisco ONS 15800 or ONS 15801 Line Extender Module–10 Gbps–Normal
For the LEM-10G-Nxx module, the Slot Properties pane displays the following tabs: Module View,
Identification, Temperature, Current, Power, Input Power, and Output Power.

D.5.5.1 Module View Tab

The Module View tab displays a graphic of the transponder that is installed in the slot. The number of
critical,major, minor, and warning alarms for the module is displayed under Alarm Status. (Moving the
mouse pointer over the graphic also displays the alarm counts.) The module status is displayed under
Operational State. Right-clicking the graphic opens a shortcut menu that you can use to display the
module in the Equipment Inventory Table or in the Alarm Browser.
TableD-271 Field Descriptions for the Output Power Tab
Field Description
Value When the Update button is clicked, displays the current transponder output power.
Low Sets the low threshold for the transponder output power (in dBm) and the alarm severity level.
High Sets the high threshold for the transponder output power (in dBm) and the alarm severity level.