Cisco Systems 78-17630-01 appendix Temperature Tab, 271

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Table D-347	Field Descriptions for the Identification Tab
Field		Description
NE ID		Displays the user-defined name of the NE where the wavelength converter module is installed.
Description		Displays information that a user has entered (if any) to describe the NE.
NE Model		Identifies the model of the selected NE (ONS 15800 or ONS 15801) where the wavelength converter
		module is installed.
Rack ID		Displays the identification number of the rack where the subrack containing the wavelength converter
		module is installed.
Subrack ID		Displays the identification number of the subrack containing the wavelength converter module.
Slot ID		Displays the identification number of the slot containing the wavelength converter module.
Software Version		Displays the version of the software.
BIOS Version		Displays the version number of the BIOS.
Board Serial		Displays the serial number of the board.
Number
SCC Number		Displays the version of the module serial communication controller (SCC).
Product Option		Displays the product option. Displays “Not Available” if the TL1 Agent version is earlier than version
		2.1.
Hardware Version		Displays the version of the hardware. Displays “Not Available” if the TL1 Agent version is earlier than
		version 2.1.
Line Direction		Shows the line direction for the wavelength converter module.
State		Allows you to place the wavelength converter module in one of two states: In Service or Under
		Maintenance.
PM Collection		Allows you to enable or disable PM data collection for the wavelength converter module.
Status

D.5.17.3 Temperature Tab

The Temperature tab allows you to assign performance monitoring thresholds for the wavelength converter module laser temperature.

Table D-348 Field Descriptions for the Temperature Tab

Field

Description

Laser 1 Temperature

Value	When the Update button is clicked, displays the current temperature of Laser 1.
Low	Sets the low temperature threshold for Laser 1 (in degrees Celsius) and the alarm severity level.
High	Sets the high temperature threshold for Laser 1 (in degrees Celsius) and the alarm severity level.

D.5.17.4 Quality of Service Tab

The Quality of Service tab allows you to assign thresholds and alarm severities for B1 and FEC counters. Click the 15 min radio button to assign thresholds for 15-minute collection increments. Click the 1 day radio button to assign thresholds for 24-hour collection increments.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-271