Cisco Systems 78-17630-01 appendix Table D-91 Field Descriptions for the Line Tab

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-91	Field Descriptions for the Line Tab (continued)
PJSTSMon#		Sets the STS that will be used for pointer justification. If set to 0, no STS is monitored. Only one STS
		can be monitored on each OC-N port.
		• 0 (Cisco default) - 3 (OC3, per port)
		• 0 (Cisco default) - 12 (OC-12)
		• 0 (Cisco default) - 48 (OC-48)
ProvidesSync		If checked, the card is provisioned as an NE timing reference.
EnableSyncMsg		Enables synchronization status messages (S1 byte), which allow the node to choose the best timing
		source.
Send DoNotUse		When checked, sends a do not use (DUS) message on the S1 byte.
Admin State		The port administration state. Choosing an administrative state from the drop-down list and clicking
		Apply changes the port’s service state unless network conditions prevent the change. Admin states
		include:
		• IS—In Service. The port service state changes to IS_NR.
		• OOS,DSBLD—Out of Service, Disabled. The port service state changes to OOS_MA, DSBLD.
		• OOS, MT—Out of Service, Maintenance. The port service state changes to OOS_MA, MT. For
		loopbacks, the OOS, MT admin state must be initiated.
		• IS, AINS—Automatic In Service. The port service state changes to OOS_AU, AINS.
AINS Soak		Automatic in-service soak. The determination of duration left before the traffic/termination
		transitions to IS state.
AINS Soak Count		Automatic in-service soak countdown. Displays the remaining time of valid input signal in hh:mm,
Down		after which the card becomes in service (IS) automatically.

	Cisco Transport Manager Release 7.2 User Guide
D-78	78-17630-01