Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-138

Field Descriptions for the Line Tab (continued)

 

 

 

 

 

Subfield

 

Description

 

 

 

 

 

Service State

 

Displays the service state:

 

 

 

IS_NR—In Service–Normal.

 

 

 

OOS_AU—Out of Service–Autonomous.

 

 

 

OOS_MA—Out of Service–Management.

 

 

 

OOS_AUMA—Out of Service–Autonomous and Management.

 

 

 

In addition, a secondary state provides additional information about the status of the entity.

 

 

 

Values for secondary state are:

 

 

 

MEA—Mismatch of equipment due to invalid equipment insertion.

 

 

 

UEQ—Unequipped; there is nothing in the slot.

 

 

 

UAS—Unassigned; the entity does not exist, has not been created, or has been deleted.

 

 

 

SWDL—Software download in progress.

 

 

 

MT—Maintenance, as per the Admin State change.

 

 

 

AINS—Automatic in service.

 

 

 

DSBLD—Traffic is disabled on the entity.

 

 

 

LPBK—Port or connection has a loopback on it.

 

 

 

FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment

 

 

 

 

and ports in FLT state should be cleared as they transition. Transition states are listed in

 

 

 

 

Table 11-10 on page 11-15.

 

 

 

See Table 11-10 on page 11-15for the Service state/Secondary state possible values.

 

 

 

Note If the NE does not support the Service State, this field shows N/A.

 

 

 

 

Synchronization Status

Allows you to view the incoming synchronization status message. Values are:

 

Message

 

PRS (Primary reference source Stratum 1)

 

 

 

 

 

 

STU (Sync traceability unknown)

 

 

 

ST2 (Stratum 2)

 

 

 

ST3 (Stratum 3)

 

 

 

ST3E (Stratum 3E)

 

 

 

SMC (SONET minimum clock)

 

 

 

ST4 (Stratum 4)

 

 

 

TNC (Transit node clock)

 

 

 

DUS (Do not use for timing synchronization)

 

 

 

RES (Reserved; quality level set by user)

 

 

 

 

 

BLSR Ext. Byte

 

Select an alternate BLSR byte. Choices are Z2, E2, or F1.

 

 

 

 

 

Type

 

Defines the port as SONET or SDH.

 

 

 

 

 

 

 

 

Section Thresh 15 Minutes

 

 

 

 

 

 

 

 

 

 

Port Number

 

The optical port number.

 

 

 

 

 

CV-S

 

Coding violations–section.

 

 

 

 

 

 

 

 

 

 

 

 

Cisco Transport Manager Release 7.2 User Guide

 

 

 

 

 

 

 

 

 

78-17630-01

 

 

 

 

D-131

 

 

 

 

 

 

 

Page 131
Image 131
Cisco Systems 78-17630-01 appendix 131