Cisco Systems 78-17630-01 appendix Line Tab, 163

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

D.4.14.2 Identification Tab

The Identification tab allows you to view and update STM-1 identification information.

Table D-175	Field Descriptions for the Identification Tab
Field		Description
Equipment Type		Displays the equipment type the slot is provisioned for.
Actual Equipment Type		Displays the actual card that is installed in the slot.
HW Part Number		Displays the card part number that is printed on the top of the card.
Hardware Revision		Displays the hardware version number of the card.
Serial Number		Displays the card serial number that is unique to each card.
CLEI Code		Displays the CLEI code.
Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
Equipment State		Displays the equipment state of the card.
Alarm Profile		Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all alarms
		for this card and its port(s).
D.4.14.3 Line Tab

The Line tab allows you to view and update STM-1 optical line performance monitoring information.

Table D-176 Field Descriptions for the Line Tab

Field	Description
Line Config
Port Number	Displays the optical port number.
Port Name	Allows you to enter an optical port name.
SD BER	Sets the signal degrade bit error rate.
SF BER	Sets the signal fail bit error rate.
Type	Defines the port.
PJVC-4 Mon#	Sets the VC that will be used for pointer justification. If set to 0, no VC is monitored. Only one
	VC can be monitored on each STM port.
ProvidesSync	If checked, the card is provisioned as an NE timing reference.
EnableSyncMsg	Enables synchronization status messages (S1 byte), which allow the node to choose the best timing
	source.
Send DoNotUse	When checked, sends a DNS (do not use) message on the S1 byte.
Admin State	Select the designation that drives whether an entity is in service or out of service. The Admin state
	is the driver for the Service state.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-163