Cisco Systems 78-17630-01 appendix Table D-13 Field Descriptions for the Identification Tab

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

FMEC Cards

The ONS 15454 SDH FMEC-E1 card provides front-mount electrical connection for fourteen ITU-compliant, G.703 E-1 ports. With the FMEC-E1 card, each E1-N-14 port operates at 2.048 Mbps over a 75-ohm unbalanced coaxial 1.0/2.3 miniature coaxial connector.

For the FMEC-E1 module, the Slot Properties pane displays the following tabs: Module View,

Identification, and Info.

D.2.3.1 Module View Tab

	The Module View tab displays a graphic of the FMEC-E1 that is installed in the slot. The number of
	critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are
	also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is
	read-only and indicates whether all alarms are suppressed for the card and its port(s).
D.2.3.2 Identification Tab
	The Identification tab allows you to view and update FMEC-E1 identification information.
Table D-13	Field Descriptions for the Identification Tab
Field		Description
Equipment Type		Displays the equipment type the slot is provisioned for.
Actual Equipment Type		Displays the actual card that is installed in the slot.
HW Part Number		Displays the card part number that is printed on the top of the card.
Hardware Revision		Displays the hardware revision number.
Serial Number		Displays the card serial number that is unique to each card.
CLEI Code		Displays the CLEI code.
Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
Product ID		Displays a product ID string of 63 characters maximum. If the card does not support the product
		ID, the field shows N/A.
Version ID		Displays a version ID string in the format “V99_.” The version ID always begins with a V and
		ends with a space. If the card does not support the version ID, the field shows N/A.
Equipment State		Displays the equipment state of the card.
Alarm Profile		Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all alarms
		for this card and its port(s).
D.2.3.3 Info Tab

The Info tab allows you to view nominal operating values set during manufacturing for the FMEC-E1 card.

Table D-14 Field Descriptions for the Info Tab

Field

Description

Extended Manufacturing Information

Attribute		Displays the nominal card specification.
Value		Displays the value of the attribute.
	Cisco Transport Manager Release 7.2 User Guide
D-10	78-17630-01