Cisco Systems 78-17630-01 appendix Slot Properties-OC48, 129

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-135	Field Descriptions for the J1 Path Trace Tab (continued)
Field		Description
Mode		Displays the path trace mode (Off/None, Auto, or Manual).
C2		Represents a machine-generated J1/J2 payload label byte.
Mismatch		Indicates whether there is a mismatch in the C2 byte received.
Vcat Member		Displays the virtual concatenation (VCAT) member number.
Number
Display		Click the Display button to view the circuit trace information. See 7.2.21.2 Viewing a J1 Path Trace from
		the NE Explorer, page 7-134for more information.
Retrieve		Click the Retrieve button to retrieve J1 path trace information.

D.4.6.10 Info Tab

The Info tab allows you to view nominal operating values set during manufacturing for the OC3 IR/STM1 SH 1310-8 module.

Table D-136 Field Descriptions for the Info Tab

Field

Description

Extended Manufacturing Information

Attribute

Value

Displays the nominal card specification.

Displays the value of the attribute.

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.7 Slot Properties—OC48

The Slot Properties pane displays information about the Cisco ONS 15600 slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

For the OC48 module, the Slot Properties pane displays the following tabs: Module View, Identification, Line, STS, Loopback, Transceiver, Protection, Alarm Behavior, and J1 Path Trace.

D.4.7.1 Module View Tab

The Module View tab displays a graphic of the OC48 that is installed in the slot. The number of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the card.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-129