D-76
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Optical Cards
D.4.2.1 Module View Tab
The Module View tab displays a graphic of the OC12-4 IR/STM4 SH 1310 that is installed in the slot.
The number of critical, major, minor, and warning alarms for the module is displayed under Alarm
Status.(Alarms also display when you move the mouse pointer over the graphic.) The Suppress Alarms
check box is read-only and indicates whether all alarms are suppressed for the card and its port(s).
Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the card.
D.4.2.2 Identification Tab
The Identification tab is where you view and update OC12-4 IR/STM4 SH 1310 identification
information.
TableD-90 Field Descriptions for the Identification Tab
Field Description
Equipment Type Displays the equipment type the slot is provisioned for.
Actual Equipment Type Displays the actual card that is installed in the slot.
Hardware Part Number Displays the card part number. This number is printed on the top of the card.
Hardware Revision Displays the hardware revision number of the card.
Serial Number Displays the card serial number. This number is unique to each card.
CLEI Code Displays the CLEI code.
Firmware Version Displays the revision number of the software used by the ASIC chip installed on the card.
Product ID Displays aproductID stringof 63characters maximum. If the card does notsupport the product
ID, the field shows N/A.
Version ID Displays a version ID string in the format “V99_.” The version ID always begins with a V and
ends with a space. If the card does not support the version ID, the field shows N/A.
Administration State The port administration state. It can be:
•IS—In Service.
•IS, AINS—Automatic In Service.
•OOS, DSBLD—Out of Service, Disabled.
•OOS, MT—Out of Service, Maintenance.