●The selected colors are undesirable when printed. Select different colors in the software application or printer driver.
●If you are using a reflective overhead projector, use a standard overhead projector instead.
Print quality problems associated with the environment
If the printer is operating in excessively humid or dry conditions, verify that the printing environment is within specifications. See the getting started guide for this printer for information on operating environment specifications.
Print quality problems associated with paper jams
Make sure that all paper is cleared from the paper path. See Paper jam recovery.
●If the printer recently jammed, print two to three pages to clean the printer.
●If the paper does not pass through the fuser, which causes image defects to appear on subsequent documents, print two to three pages to clean the printer. However, if the problem persists, see Print quality troubleshooting pages.
Print quality problems associated with toner buildup inside the printer
Over time, toner and other particles can build up inside the printer. This buildup can cause the following print quality problems:
●marks at even intervals on the printed side of the page
●toner that smears easily
●toner specs on the page
●vertical streaks or bands on the page
To correct these types of problems, clean the printer. See Cleaning the printer.
Print quality troubleshooting pages
Use the
1.Press MENU to enter the MENUS.
2.Press 
to highlight DIAGNOSTICS.
3.Press 
to select DIAGNOSTICS.
4.Press 
to highlight PQ TROUBLESHOOTING.
5.Press 
to print the pages.
The printer returns to the Ready state after printing the print quality troubleshooting pages. If print quality defects are found when you review the print quality troubleshooting pages, perform a printer calibration. See Calibrating the printer.
ENWW | Print quality troubleshooting 191 |
