Control panel messages (continued)
Control panel message
NON HP SUPPLY DETECTED
alternates with
For help press
NON HP SUPPLY
IN USE
alternates with
Ready
Description
A new supply has been installed that is not made by HP. This message is displayed until an HP supply is installed or is pressed.
The printer has detected that a non- HP supply is currently installed and (override) was pressed.
Recommended action
If you believe you purchased an HP supply, please call the HP fraud hotline at
Service or repairs required as a result of using
To continue printing, press . The first pending job will be cancelled.
If you believe you purchased an HP supply, please call the HP fraud hotline at
Service or repairs required as a result of using
ORDER <COLOR>
CARTRIDGE
alternates with
Ready
ORDER FUSER KIT
alternates with
Ready
For help press
The identified print cartridge is nearing the end of its useful life. The printer is ready and will continue for the estimated number of pages indicated.
The fuser is near end of life. The printer is ready and will continue for the estimated number of pages indicated.
Order the identified print cartridge. Printing will continue until REPLACE <COLOR> CARTRIDGE is shown.
NOTE
Estimated pages remaining is based upon historical page coverage with this supply of one percent.
See Supplies and accessories for more information.
Order the fuser kit. Printing can continue until REPLACE FUSER KIT is shown.
or
Press for help.
See Supplies and accessories for more information.
Order Supplies
alternates with
Ready
ORDER TRANSFER KIT
alternates with
Ready
For help press
More than one supply item is low.
The number of pages remaining for the transfer unit has reached the low threshold, and the SUPPLIES LOW setting in SYSTEM SETUP is set to STOP.
1.Press to identify which supplies should be ordered.
2.Order the identified supplies. Printing can continue until REPLACE SUPPLIES is reached.
or
Press for help.
See Supplies and accessories for more information.
Order the transfer kit. Printing can continue until REPLACE TRANSFER KIT is reached.
Press for help.
See Supplies and accessories for more information.
ENWW | Control panel messages 145 |