Jam recovery
This option allows you to configure the printer response to paper jams, including how it handles the pages involved. AUTO is the default value.
●AUTO. The printer automatically turns jam recovery on when sufficient memory is available.
●ON. The printer reprints any page involved in a paper jam. Additional memory is allocated to store the last few pages printed. This might cause overall printer performance to suffer.
●OFF. The printer will not reprint any page that was involved in a paper jam. Since no memory is used to store the most recent pages, performance might be optimal.
To set jam recovery response
1.Press MENU to enter the MENUS.
2.Press 
to highlight Configure Device.
3.Press 
to select Configure Device.
4.Press 
to highlight SYSTEM SETUP.
5.Press 
to select SYSTEM SETUP.
6.Press 
to highlight JAM RECOVERY.
7.Press 
to select JAM RECOVERY.
8.Press 
or 
to select the appropriate setting.
9.Press 
to set the selection.
10.Press MENU.
Language
The option to set the default language appears when the printer is turned on for the first time. As you scroll through the available options, the list appears in the language that is highlighted. When the list appears in the language desired, press 
to set the language. You can also change the language at any time by performing the following procedures:
To select language
1.Press MENU to enter the MENUS.
2.Press 
to highlight Configure Device.
3.Press 
to select Configure Device.
4.Press 
to highlight SYSTEM SETUP.
5.Press 
to select SYSTEM SETUP.
6.Press 
to highlight Language.
7.Press 
to select Language.
8.Press 
or 
to select the appropriate language.
9.Press 
to set the selection.
10.Press MENU.
ENWW | Changing printer control panel configuration settings | 45 |
