Control panel messages (continued)
Control panel message Rotating <COLOR> motor
alternates with
To exit press
STOP key
Rotating motor
alternates with
To exit press
STOP key
Description
A component test is in progress; the component selected is <color> Cartridge motor.
The printer is executing a Component Test and the component selected is Rotating <COLOR>.
Recommended action
Press STOP when ready to stop this test.
Press STOP when ready to stop this test.
Setting saved
Tray X
<TYPE> <SIZE>
alternates with
To change size or type press 
UNAUTHORIZED SUPPLY IN USE
alternates with
Ready
A menu selection has been saved.
The printer is reporting the current configuration of Tray X.
The printer has detected that a 
(override) was pressed.
No action necessary.
No action necessary.
See Configuring trays for more details.
If you believe you purchased an HP supply, please call the HP fraud hotline at
Service or repairs required as a result of using
UNSUPPORTED DATA ON | The data on the DIMM is not supported | |
<FS> DIMM IN SLOT X | (although the DIMM itself may be | |
supported). | ||
| ||
alternates with |
| |
To clear press |
|
Press 
to clear this message.
or
Press SELECT to continue printing.
USE TRAY X <TYPE> <SIZE>
Wait for printer to reinitialize
The printer is offering a selection of alternate paper to use for the print job.
Settings have been changed before the printer automatically restarts, or external device modes have changed.
1.If desired, use 
and 
to highlight a different size or type, and then press 
to select the size or type.
2.Press 
to return to the previous size or type.
See Configuring trays for more information.
No action necessary.
ENWW | Control panel messages 151 |
