HP 3550 JOB Name, Cannot Duplex Check Rear BIN, Cannot Duplex Check Paper, Cleaning Data Received

Control panel messages (continued)

Control panel message

Calibrating...<TEST> Canceling...

<JOB NAME>

Description	Recommended action
The printer is calibrating.	No action necessary.
The printer is in the process of canceling	No action necessary.
a job. The message will continue to be
displayed while the job is stopped, the
paper path flushed, and any remaining
incoming data on the active data
channel is received and discarded.

CANNOT DUPLEX CHECK REAR BIN

alternates with

CANNOT DUPLEX CHECK PAPER

CANNOT DUPLEX close rear bin

The lower rear door (rear output bin)	For the HP Color LaserJet 3700dn and
was opened during the automatic duplex	3700dtn printer models only.
job, or the printer detected a paper size	Close the lower rear door (rear output
that will not go through the auto-duplexer.
	bin) or load paper that is supported for
	auto-duplexing. See Supported paper
	weights and sizes
A 2-sided print job has been sent to the	For the HP Color LaserJet 3700dn and
printer while the lower rear door (rear	3700dtn printer models only.
output bin) is open.	Close the lower rear door (rear output
	bin).

Checking paper path

Checking printer

CHOSEN PERSONALITY NOT AVAILABLE

alternates with

To continue press Cleaning...

Clearing event log

The engine is turning its rollers to check for possible paper jams.

The engine is doing an internal test.

The printer encountered a request for a personality that did not exist in the printer. The job is aborted and no pages will be printed.

The printer is in the process of cleaning.

This message is displayed while the event log is cleared. The printer will back up one screen to Service Menu upon completion of printing the page.

No action necessary.

No action necessary.

1.Press to continue.

2.Try a different driver.

No action necessary. No action necessary.

Clearing paper path

CLOSE FRONT DOOR CLOSE UPPER REAR DOOR Creating...

CLEANING PAGE

DATA RECEIVED

alternates with

Ready

The printer jammed or detected misplaced paper when turned on. The printer is attempting to eject jammed pages automatically.

The front door needs to be closed. The upper rear door is open.

The printer is generating a cleaning page. The printer returns to the Ready state when the cleaning page is finished printing.

The printer received data and is waiting for a form feed. When the printer receives another file, the message should disappear.

No action necessary.

Close the front door.

Close the upper rear door.

1.Press MENU to enter the menus.

2.Load the cleaning page into Tray 1.

3.Select PROCESS CLEANING PAGE.

Press to continue.

ENWW Control panel messages 141