Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

D.4.13.2 Identification Tab

The Identification tab allows you to view and update S16.1-1-LC identification information.

Table D-171

Field Descriptions for the Identification Tab

 

 

 

Field

 

Description

 

 

 

Equipment Type

 

Displays the equipment type the slot is provisioned for.

 

 

Actual Equipment Type

Displays the actual card that is installed in the slot.

 

 

HW Part Number

Displays the card part number that is printed on the top of the card.

 

 

Hardware Revision

Displays the hardware revision number.

 

 

 

Serial Number

 

Displays the card serial number that is unique to each card.

 

 

 

CLEI Code

 

Displays the CLEI code.

 

 

Firmware Version

Displays the revision number of the software used by the ASIC chip installed on the card.

 

 

 

Product ID

 

Displays a product ID string of 63 characters maximum. If the card does not support the product

 

 

ID, the field shows N/A.

 

 

 

Version ID

 

Displays a version ID string in the format “V99_.” The version ID always begins with a V and

 

 

ends with a space. If the card does not support the version ID, the field shows N/A.

 

 

 

Equipment State

 

Displays the equipment state of the card.

 

 

 

Alarm Profile

 

Displays the alarm profile for the port.

 

 

 

D.4.13.3 STM Line Tab

 

The STM Line tab allows you to view and update S16.1-1-LC optical line performance monitoring

 

information.

Table D-172

Field Descriptions for the Line Tab

 

 

 

Field

 

Description

 

 

 

Port Number

 

Displays the optical port number.

 

 

 

Port Name

 

Allows you to enter an optical port name.

 

 

 

ProvidesSync

 

If checked, the card is provisioned as an NE timing reference.

 

 

 

EnableSyncMsg

 

Enables synchronization status messages (S1 byte), which allow the node to choose the best timing

 

 

source.

 

 

 

Send DoNotUse

 

When checked, sends a DNS (do not use) message on the S1 byte.

 

 

 

Admin State

 

Shows the administrative state of the port: In Service (IS), or Out of Service (OOS).

 

 

 

 

 

Cisco Transport Manager Release 7.2 User Guide

 

 

 

 

 

 

 

78-17630-01

 

 

D-161

 

 

 

 

 

Page 161
Image 161
Cisco Systems 78-17630-01 appendix 161