Whirlpool SF372BEE W/N, SF395LEE Q/Z/B, TGS325E W, SF385PEE Q/Z Removing the Bake Burner & Ignitor

Cooking Products Service Manual

Original July, 19964321891

© 1996 Whirlpool Corporation Page 3-23

REMOVING THE BAKE BURNER & IGNITOR

WARNING

Electrical Shock Hazard

Disconnect from electrical supply before servic- ing unit.

Failure to do so could result in death or electri- cal shock.

CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.

1.Turn off the gas to the range and disconnect the power cord from the wall outlet.

2.Remove the oven door (see page 1-20 for the procedure).

3.Remove the racks from the oven.

4.Remove the two screws from the oven floor and remove it.

REMOVE

SCREWS

5.Remove the heat shield from the oven .

REMOVE SCREWS

6.Remove the front and back mounting screws from the bake burner.

	BACK OF
MOUNTING	OVEN LINER
SCREW
BAKE BURNER	BRACKET
MOUNTING
SCREW
	MOUNTING
	SCREWS
BAKE
IGNITOR
	HOLE IN
	BOTTOM LINER
	QUICK-DISCONNECT
	PLUGS (LOCATED IN
	STORAGE AREA)

7.Remove the storage drawer.

8.From inside the storage drawer area, discon- nect the bake ignitor quick-disconnect plug from the main harness.

9.Remove the bake burner and ignitor assem- bly from the oven.

10.Reinstall the new bake burner and ignitor assembly and reassemble the range.

3-23