REMOVING THE ELECTRONIC OVEN CONTROL
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic- ing unit.
Failure to do so could result in death or electri- cal shock.
CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.
1.Pull the range away from the wall so that you can access the back.
2.Turn off the gas to the range and disconnect the power cord from the wall outlet.
3.From behind the range, remove the upper access cover.
UPPER CONSOLE
OVEN CONTROL
REMOVE UPPER
ACCESS COVER
4.Pull the knob off the control shaft (if present).
OVEN CONTROL
CONSOLE PANEL
| OVEN | OVEN | ON |
| OFF | PUSH |
|
DOOR | HEATING |
|
|
| |||
|
|
| TURN | ||||
| LOCKED/CLEANING | CLEAN |
|
| TO | ||
|
|
| WARM | ||||
| TURN |
|
| ||||
|
|
|
| PUSH TO |
|
| |
|
|
|
| BROIL |
|
| 200 |
|
|
|
| 500 |
|
| 250 |
|
|
|
|
|
|
| |
450300
450 400 350
CONTROL KNOB
5.Without disconnecting any wires, remove the mounting screws from the electronic oven control and remove it from the back of the console.
OVEN CONTROL | MOUNTING |
SCREWS |
CONSOLE PANEL
6.Mount the new electronic oven control to the upper console and install the knob (if appli- cable) on the control shaft.
7.Unplug the connectors from the old oven control, and reconnect them to the new oven control at the same callout (P1, P2, etc.) location.
8.Reassemble the range.
