Whirlpool FGS335E W/N Converting the Oven Burners for L.P. GAS, Bake Burner, Broil Burner

Cooking Products Service Manual

Original July, 1996	4321891
© 1996 Whirlpool Corporation	Page 1-15

CONVERTING THE OVEN BURNERS FOR L.P. GAS

THE BAKE BURNER

1.Remove the oven racks.

2.Remove the two screws from the oven floor and remove the floor.

THE BROIL BURNER

1.Remove the oven racks.

2.Remove the two screws (shown in the illustra- tion) from the broil burner and lift the burner off the orifice hood.

broil burner

screws

screw

screw

3.Remove the screws from the heat shield over the bake burner and remove the shield.

heat shield

screws

4.Use a 1/2" combination wrench and turn the orifice hood at the base of the bake burner clockwise until it is just snug (approximately 2-1/2turns). NO NOT OVERTIGHTEN THE HOOD.

orifice hood		bake burner
pin	hood
Natural gas	L.P. gas
increases	decreases flame
flame size in	size in this direction
this direction

	orifice hood
pin	hood
Natural gas	L.P. gas
increases	decreases flame
flame size in	size in this direction
this direction

3.Use a 1/2" combination wrench and turn the orifice hood at the base of the broil burner clockwise until it is just snug (approximately 2-1/2turns). NO NOT OVERTIGHTEN THE HOOD.

1-15