Whirlpool SF395LEE Q/Z/B, TGS325E W Removing the Oven Door Handle TOP TRIM, & Outer Door Glass

REMOVING THE OVEN DOOR HANDLE,

TOP TRIM, & OUTER DOOR GLASS

WARNING

Electrical Shock Hazard

Disconnect from electrical supply before servic- ing unit.

Failure to do so could result in death or electri- cal shock.

CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.

REMOVING THE OVEN

DOOR HANDLE

1.Turn off the gas to the range and disconnect the power cord from the wall outlet.

2.Remove the oven door (see page 1-20 for the procedure), and position it on the floor with the handle and outer door glass facing up.

3.Remove the two door handle screws from the liner side of the door. Remove the old handle and install the new one with the two screws.

4.Reinstall the oven door on the range.

REMOVING THE TOP TRIM & OUTER DOOR GLASS

1.Turn off the gas to the range and disconnect the power cord from the wall outlet.

2.Remove the oven door (see page 1-20 for the procedure), and position it on the floor with the handle and outer door glass facing up.

3.Raise the top of the door and remove the two screws that secure the top of the door trim and the handle to the door liner, then remove the handle and top trim.

4.Lift the outer door glass off the door and set the new glass in its place so that the bottom edge is against the bottom trim.

5.Install the new top trim and handle on the oven door and secure them in place with their two mounting screws.

6.Reinstall the oven door on the range.

MOUNTING SCREWS

TOP TRIM

HANDLE

OUTER DOOR

GLASS

SET GLASS

BOTTOM TRIM

3-30