Input

Input 2

Move a pointer to Input 2 and press the SELECT button.

RGB

When the input source is analog coming

 

from a computer through the Input 2 (5

 

BNC-type: Red, Green, Blue, H. Sync., and

 

V. Sync.) terminal, select RGB.

Video

When video input signal is connected to the

 

Input 2 (VIDEO) terminal , select Video.

Y, Pb/Cb, Pr/Cr

When the input source is component

 

coming from video equipment connected to

 

the Input 2 (Y, Pb/Cb, Pr/Cr) terminal, select

 

Y, Pb/Cb, Pr/Cr.

Source Select Menu

Move the pointer to RGB, Video, or Y, Pb/Cb, Pr/Cr, and press the SELECT button.

Input 3

Move a pointer to Input 3 and press the SELECT button.

Video

When video input signal is connected to the

 

Input 3 (VIDEO) terminal, select Video.

Y, Pb/Cb, Pr/Cr

When the input source is component

 

coming from video equipment connected to

 

the Input 3 (Y, Pb/Cb, Pr/Cr) terminal, select

 

Y, Pb/Cb, Pr/Cr.

S-Video

When video input signal is connected to the

 

Input 3 (S-VIDEO) terminal, select S-Video.

Source Select Menu

Move the pointer to Video, Y, Pb/Cb, Pr/Cr, or S-Video and press the SELECT button.

Input 4/Input 5

A source menu appears corresponding to the board module inserted into the Input 4 and Input 5 terminals.

Note:

Input 4 and Input 5 can not be selected when no interface board is inserted into the respective slots. (p21)

Input 5 terminal can only accept digital signals.

Adjusted values or selected settings in Input 4 and Input 5 return to factory default setting when the connected interface boards are removed from those terminal slots.

Input

37

Page 37
Image 37
Christie Digital Systems LX66A Move a pointer to Input 2 and press the Select button, From a computer through the Input 2