Basic Operation

Turning Off the Projector

1

Press the POWER ON-OFF button on the top control or the

 

 

 

 

remote control, and a message “Power off?” appears on the

 

 

 

 

 

screen.

 

 

 

 

2

Press the POWER ON-OFF button again to turn off the

 

 

 

 

 

 

 

 

 

 

 

 

projector. The LAMP indicator brightly lights red and the

 

 

 

 

 

READY indicator goes out. After approximately 90 seconds,

 

 

 

 

 

the READY indicator will light green again and then the

 

 

 

 

 

projector can be turned on by pressing the POWER ON-OFF

The message disappears after 4 seconds.

 

button.

 

 

 

 

3

The Cooling fans operate for approximately 2 minutes after

 

 

 

 

the projector is turned off; keep operating more 30 seconds

 

 

 

 

after the READY indicator lights green. To power down the projector completely, turn off the MAIN On/Off switch and disconnect the AC Power Cord.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN

PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE

TURNING IT OFF.

DO NOT DISCONNECT AC POWER CORD WHILE

COOLING FANS ARE RUNNING OR BEFORE POWER

INDICATOR LIGHTS RED. OTHERWISE IT WILL

RESULT IN SHORTENING LAMP LIFE.

Note:

The projector cannot be turned on for about 90 seconds after turned off. You can turn it on again after the READY indicator lights green.

When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (See page 52 for the On start function.)

Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours.

This projector monitors internal temperature and automatically controls the running speed of the cooling fans.

If the WARNING TEMP indicator blinks red or all the indicators except the LAMP indicator are blinking, see “Warning Temp Indicator” on page 60.

When “Power management” mode is Ready or Shut down, projector detects signal interruption and turns off the Projection Lamp automatically after the set time has passed. Refer to “Power management” on page 52.

28

Page 28
Image 28
Christie Digital Systems LX66A user manual Turning Off the Projector