Installation

Connecting AC Power Cord

This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of type of the power being supplied.

Connect the projector with all peripheral equipment before turning it on. (Refer to pages 22 ~ 24 for connection.)

CAUTION

For safety, unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord and the Main On/Off switch is on, it is in stand- by mode and consumes a little electric power.

Main On/Off switch

AC power socket

Connect the AC power cord (supplied) to this socket. The AC outlet must be near this equipment and must be easily accessible.

NOTE ON THE POWER CORD

The AC Power Cord must meet the requirement of the country where you use the projector. Confirm the AC plug type with the chart below. The proper AC Power Cord must be used. If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.

Projector side

 

AC Outlet side

 

 

 

 

 

 

 

 

 

 

 

 

For the U.S.A. and Canada

 

For Continental Europe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ground

 

 

To the POWER CORD

 

 

 

 

 

To the AC Outlet.

 

 

CONNECTOR on the

 

 

 

 

(120 V AC)

 

To the AC Outlet.

projector.

 

 

 

(200 - 240 V AC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

Page 20
Image 20
Christie Digital Systems LX66A Connecting AC Power Cord, For Continental Europe, For the U.S.A. and Canada, 200 240 V AC