English
On the front panel:
You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.
1. Press SURROUND repeatedly | SURROUND |
until the mode — “PRO LOGIC” |
|
or “THEATER” — appears on the |
|
display. |
|
•When selecting “PRO LOGIC,” the PRO LOGIC indicator also lights up on the display.
•When selecting “THEATER,” the DSP, PRO LOGIC and THEATER indicators also light up on the display.
2. Press ADJUST so that the cursor | ADJUST |
control %/ Þ/ @/ #buttons work |
|
for adjusting the DSP setting. |
|
3. Press cursor control % / Þ repeatedly until “CENTER LEVEL” appears on the display.
4. Press cursor control @/ #to adjust the center speaker output level (from
5. Press cursor control % / Þ repeatedly until “REAR LEVEL” appears on the display.
6. Press cursor control @/ #to adjust the rear speaker output level (from
Note:
You cannot adjust the left and right rear speaker output levels
separately.
7. ONLY FOR “THEATER”:
Press cursor control % / Þ repeatedly until “DSP EFFECT” appears on the display.
8. ONLY FOR “THEATER”:
Press cursor control @/ #to select an effect level you want.
•Each time you press the button, the effect level changes as follows:
DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3
DSP EFFECT 5 | DSP EFFECT 4 |
As the number increases, JVC Theater Surround becomes stronger.
Activating the DSP Modes
Once you have finished adjustments for the DSP modes, you can use the same adjustments every time you want to use these modes.
On the front panel:
SURROUND
1. Press SURROUND repeatedly until the DSP mode you want appears on the display.
•Each time you press the button, the DSP modes change. (See page 18 for more details.)
2.Select and play a sound source.
•To enjoy the
Dolby Surround and is labeled with mark.
To cancel the DSP mode
Press SURROUND repeatedly until “OFF” appears on the display.
From the remote control:
1. Press SOUND CONTROL. | SOUND |
CONTROL |
The 10 keys are activated for sound adjustments.
2. Press SURROUND repeatedly
until the DSP mode you want | SURROUND | |
3 | ||
appears on the display. | ||
|
•Each time you press the button, the DSP modes change. (See page 18 for more details.)
3.Select and play a sound source.
•To enjoy the
Dolby Surround and is labeled with mark.
To cancel the DSP mode
Press SURROUND repeatedly until “OFF” appears on the display in step 2 above.
21