3. Adjust the effect level.

BALANCE/SURROUND

1) Press BALANCE/SURROUND

 

ADJUST

 

 

 

ADJUST repeatedly until “DSP

 

 

 

EFFECT” appears on the display.

 

 

 

The display changes to show the current

 

 

 

setting.

 

MULTI JOG

 

 

2)Turn MULTI JOG to select the effect level.

•As you turn it, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

From the remote control:

1. Press SURROUND MODE

SURROUND

 

repeatedly until the DAP mode —

MODE

 

LIVE CLUB, DANCE CLUB,

 

HALL, or PAVILION — appears

 

on the display.

 

The DSP and the selected DAP mode indicators also light up on the display.

SOUND

2. Press SOUND.

The 10 keys are activated for sound adjustments.

3. Adjust the speaker output levels.

 

 

 

 

REAR•L

 

 

 

 

5

6

• To adjust the left rear speaker level, press

 

 

 

 

ENTER

REAR•L –/+ (from –10 dB to +10 dB).

 

 

 

 

 

• To adjust the right rear speaker level, press

 

 

 

 

 

REAR•R –/+ (from –10 dB to +10 dB).

 

 

 

 

REAR•R

 

 

 

 

Adjusting the Surround Modes

Once you have adjusted the Surround modes, the adjustment is memorized for each Surround mode.

Dolby and DTS Surround adjustments

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 14).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You cannot adjust the rear speaker output levels when you have set “REAR SPK” to “NONE.” See page 14.

•You cannot adjust the center speaker output level and center tone when you have set “CENTER SPK” to “NONE.” See page 14.

From the remote control:

1. Press SURROUND MODE

SURROUND

 

repeatedly until the mode — PRO

MODE

 

LOGIC, DOLBY DIGITAL, or

 

DTS SURROUND — appears on

 

the display.

 

•When “PRO LOGIC” is selected, the PRO LOGIC indicator lights up on the display.

Note:

You can also press SURROUND ON/OFF to activate an appropriate Surround mode — PRO LOGIC, DOLBY DIGITAL, or DTS SURROUND. Each time you press the button, the Surround mode turns on and off alternately.

2.

Press SOUND.

SOUND

 

 

The 10 keys are activated for sound adjustments.

 

3.

Press TEST to check the speaker

TEST

4.Press EFFECT to select an effect level you want.

•Each time you press the button, the effect level changes as follows:

8 9

EFFECT

7/P

output balance.

 

 

 

4

“TEST TONE L” starts flashing on the

 

 

 

display, and a test tone comes out of the

 

 

speakers in the following order:

 

 

 

 

TEST TONE L

 

TEST TONE C

 

TEST TONE R

 

(Left front speaker)

 

(Center speaker)

 

(Right front speaker)

 

TEST TONE LS

TEST TONE RS

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

(Left rear speaker)

 

(Right rear speaker)

Page 25 Page 27
Page 26
Image 26
JVC RX-888VBK manual Adjusting the Surround Modes
Page 25 Page 27

RX-888VBK specifications

The JVC RX-888VBK is a robust stereo receiver that showcases JVC's commitment to high-quality audio and user-friendly design. Launched in the late 1990s, this receiver remains popular among audio enthusiasts due to its impressive features and reliable performance.

One of the standout characteristics of the RX-888VBK is its powerful amplification capabilities. With an output of 100 watts per channel, the receiver can drive a variety of speakers, delivering rich and clear sound across a wide range of frequencies. This power makes it suitable for both casual listening and more immersive home theater setups.

The RX-888VBK incorporates various advanced technologies, including JVC’s proprietary MOS-FET transistors. These devices enhance the audio quality by reducing distortion and improving dynamic range. The receiver also features an extensive equalizer that allows users to fine-tune their listening experience according to their personal preferences or the acoustic characteristics of their listening environment.

Another notable feature of the RX-888VBK is its multi-source and multi-zone capabilities. This allows users to enjoy different audio sources in different zones of their home simultaneously. It supports a range of input options, including multiple analog and digital connections, ensuring compatibility with a variety of devices such as CD players, turntables, and media players.

For added convenience, the JVC RX-888VBK includes a remote control, allowing users to adjust settings from a distance. This user-friendly design extends to its intuitive front panel, which features clearly labeled knobs and buttons for easy operation.

The receiver also includes a built-in AM/FM tuner with 30 preset stations, making it simple to access a wide range of radio content. Additionally, the RX-888VBK is equipped with a headphone jack for private listening, catering to those who prefer a more personal audio experience.

The JVC RX-888VBK is not just about power and features; it also boasts a sleek and stylish design that fits seamlessly into any audio setup. With its blend of high performance, versatility, and aesthetic appeal, the RX-888VBK remains a compelling choice for music lovers looking to enhance their audio enjoyment.
Top Page Image Contents