JVC RX-D301S, RX-D302B Activating the Surround/DSP modes

English

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step

again.

Select and play any source other than DVD

MULTI.

• Make sure you have selected the input mode (analog or

digital) correctly.

Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

Turn MULTI JOG to select the Surround/DSP

mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

*1“AUTO SURROUND” is the initial setting.

*2Available Surround modes vary depending on the speaker

settings and the incoming signals. For details, see page

32.

*3 If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO”

is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the

display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.

• For details about the Surround modes, see page 32.

• When “AUTO SURROUND” is activated, the AUTO SURR indicator

lights up on the display.

How does “AUTO SURROUND” work?

• If a multi-channel signal comes in, an appropriate Surround

mode will be selected automatically.

• If a Dolby Digital 2-channel signal with surround signal comes

in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.

• If a Dolby Digital 2-channel signal without surround signal

comes in, “SURROUND OFF (stereo)” will be selected.

• If a Linear PCM signal comes in, “SURROUND OFF (stereo)”

will be selected.

NOTE

“AUTO SURROUND” does not take effect in the following cases:

– While playing an analog source,

– While selecting one of the fixed digital decode mode—“DOLBY

DIGITAL” or “DTS” (see page 15).

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker

settings and the incoming signals. For details, see page 32.

Activating one of the Surround/DSP modes automatically

recalls the memorized settings and adjustments.

• To adjust the speaker output level, see page 24.

• When activating one of the Surround/DSP modes, you

can adjust CENTER TONE. (see page 26)

• When activating one of the Surround/DSP modes

(except Pro Logic IIx Music, Pro Logic II Music, NEO:6

Music, and ALL CH STEREO), you can adjust CENTER

ALIGN. (see page 26)

• When activating NEO:6 MUSIC, you can adjust CENTER

GAIN. (see page 26)

• When activating the DSP mode (except All Channel

Stereo mode), you can adjust the following settings:

EFFECT (see page 25)

LIVENESS (see page 25)

ROOM SIZE (see page 25)

• When activating “PLIIx MUSIC” and “PLII MUSIC”, you

can adjust the following settings:

CENTER WIDTH (see page 26)

DIMENSION (see page 26)

PANORAMA (see page 25)

Selecting the Surround/DSP modes

From the remote control:

Select and play any source other than DVD

MULTI.

• Make sure you have selected the input mode (analog or

digital) correctly.

Press SURROUND repeatedly to select the

Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

*1“AUTO SURROUND” is the initial setting.

*2Available Surround modes vary depending on the speaker

settings and the incoming signals. For details, see page

32.

*3 If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO”

is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF”

appears on the display.

1,3

LS RS

S.WFR LFE

DIGITAL

DIGITAL AUTO

SURROUND OFF (Back to the beginning)

Surround modes*

AUTO SURROUND*

HALL1 HALL2 LIVE CLUB DANCE CLUB

PAVILION THEATER1 THEATER2

MONO FILM*

ALL CH STEREO*