JVC RX-D301S, RX-D302B Changing the display brightness, Turning off the power with the Sleep Timer, Making sounds natural

Basic adjustment of auto memory

This receiver memorizes sound settings for each source:

• when you turn off the power, and

• when you change the source.

When you change the source, the memorized settings for the

newly selected source are automatically recalled.

The following can be stored for each source:

• Analog/digital input mode (see page 14)

• Bass boost (see page 25)

• Digital equalization pattern (see page 24)

• Input attenuator mode (see page 25)

• Midnight mode (see page 21)

• Speaker output level (see page 24)

• Surround/DSP mode selection (see page 33)

NOTE

If the source is FM or AM, you can assign a different setting

for each band.

Signal and speaker indicators on the display

Signal indicators Speaker indicators

The signal indicators light up as follows:

L: • When digital input is selected: Lights up when the

left channel signal comes in.

•When analog input is selected: Always lights up.

R: • When digital input is selected: Lights up when the

right channel signal comes in.

•When analog input is selected: Always lights up.

C: Lights up when the center channel signal comes in.

LS: Lights up when the left surround channel signal comes

in.

RS: Lights up when the right surround channel signal comes

in.

S: Lights up when monaural surround signal comes in.

SB: Lights up when the surround back channel signal

comes in.

LFE: Lights up when the LFE channel signal comes in.

NOTE

When “DVD MULTI” is selected as the source, all the signal

indicators except “SB,” “S,” and “LFE” light up.

The speaker indicators light up as follows:

• The subwoofer indicator (

S.WFR

) lights up when

“SUBWOOFER” is set to “SUBWFR <YES>.” For details,

see page 19.

• The other speaker indicators light up only when the

corresponding speaker is set to “SML (small)” or “LRG

(large),” and also when required for the current playback.

Changing the display brightness

You can dim the display—Dimmer.

From the remote control ONLY:

Press DIMMER repeatedly.

• Each time you press the button, the display brightness changes

as follows:

DIMMER 1: Dims the display.

DIMMER 2: Dims the display more than DIMMER 1.

DIMMER 3: Turns off the display.

(Temporarily canceled when you operate the

receiver.)

DIMMER OFF: Cancels the Dimmer (normal display).

Turning off the power with the Sleep

Timer

You can fall asleep while listening to music—Sleep Timer.

From the remote control ONLY:

Press SLEEP repeatedly.

• Each time you press the button, the shut-off time changes in 10

minute intervals. The SLEEP indicator lights up on the display.

SLEEP indicator

When the shut-off time comes:

The receiver turns off automatically.

To check or change the remaining time until the shut-off

time:

Press SLEEP once.

The remaining time (in minutes) until the shut-off time appears.

• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer:

Press SLEEP repeatedly so that “SLEEP OFF” appears on the

display. (The SLEEP indicator goes off.)

• The Sleep Timer is also canceled when you turn off the

receiver.

Making sounds natural

JVC’s CC (Compression Compensative) Converter eliminates

jitter and ripples, achieving a drastic reduction in digital distortion

by processing the digital music data in 24 bit-quantization and by

expanding the sampling frequency to 176.4 kHz (for fs 44.1 kHz

signals)/192 kHz (for fs 48 kHz signals) on the front speakers.

By using the CC Converter, you can obtain a natural sound field

from both digital and analog sources.

Press CC CONVERTER repeatedly.

• Each time you press the button, the mode changes as follows:

CC CNVRTR 1: Select when playing back an analog

source or a digital source with non

compressed digital sound signal (Linear

PCM).

The CC CONVERTER 1 indicator lights

up on the display.

CC CNVRTR 2: Select when playing back a source with

compressed digital sound signal (Dolby

Digital or DTS).

The CC CONVERTER 2 indicator lights

up on the display.

CC CNVRTR OFF: Select when not using the CC Converter.

LINEAR PCM

S.WFR PL

NEO : 6 DSP

3D-PHONIC

LFE

96 / 24

AUTO SURR

VIRTUAL SB

HEADPHONE

DIGITAL

DIGITAL AUTO

ANALOG

DUAL MONO

S.WFR LFE

S.WFR

AUTO SURR

SLEEP

ANALOG

10min 20min 30min 40min 50min 60min

90min

OFF (canceled) 80min 70min

NOTE

When “DVD MULTI” is selected as the source, this function is not

available.

14-16RX-D301S[J]_f.p65 05.2.23, 13:1916