23
English

Sound adjustments

You can make sound adjustment to your preference after
completing basic setting.

Basic adjustment items

You can adjust the following items. See pages in parentheses for
details.
•You cannot select the items which is not available with the
current setting.
Items To do
SUBWFR LVL*1Adjust the subwoofer output level. (24)
FRONT L LVL*1*2Adjust the left front speaker output level.
(24)
FRONT R LVL*1*2Adjust the right front speaker output level.
(24)
CENTER LVL*1*2Adjust the center speaker output level. (24)
SURR L LVL*1*2Adjust the left surround speaker output level.
(24)
SURR R LVL*1*2Adjust the right surround speaker output
level. (24)
S BACK LVL*1*2Adjust the surround back speaker output
level. (24)
S BACK L LVL*1*2Adjust the left surround back speaker output
level. (24)
S BACK R LVL*1*2Adjust the right surround back speaker
output level. (24)
D EQ 63Hz*1Adjust the equalization pattern of each
D EQ 250Hz*1band. (24)
D EQ 1kHz*1
D EQ 4kHz*1
D EQ 16kHz*1
BASS BOOST Boost the bass level. (25)
INPUT ATT Attenuate the input level of analog source.
(25)
EFFECT*1Adjust the effect level. (25)
ROOM SIZE Select the room size for your virtual listening
room. (25)
LIVENESS Select the liveness level for your virtual
listening room. (25)
PANORAMA Add “wraparound” sound effect with side-
wall image. (25)
CENTER WIDTH Adjust the center channel localization
between the center speaker and the left/
right speakers. (26)
DIMENSION Adjust sound localization pattern. (26)
CENTER GAIN Adjust the sound localization of the center
channel. (26)
CENTER TONE*1Make the center tone soft or sharp. (26)
CENTER ALIGN Align the vertical localization of the center
channel signals. (26)
*1You can also use the remote control for the adjustment.
*2If you have used Quick Speaker Setup on page 17, these
settings are not required.
Operating procedure
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1
again.
Ex.: When adjusting subwoofer output level.
1
Press ADJUST.
MULTI JOG now works for the sound adjustment.
2
Turn MULTI JOG until the item you want to
adjust appears on the display.
•As you turn MULTI JOG, the adjustment items change as
follows:
3
Press SET.
The current setting for the selected item appears.
4
Turn MULTI JOG to adjust the selected item.
Your adjustment is stored.
5
Press SET.
6
Repeat steps
2
to
5
to adjust other items if
necessary.
7
Press ADJUST.
The source indication resumes on the display.
L
S.WFR
R
ANALOG
L
S.WFR
R
ANALOG
–10 0 +10
L
S.WFR
R
ANALOG

CENTER LVL

SURR L LVL

D EQ 63Hz

D EQ 250Hz

(Back to the beginning)

SURR R LVL

FRONT L LVL

FRONT R LVL

S BACK L LVL

S BACK R LVL

D EQ 4kHz

BASS BOOST

D EQ 16kHz

LIVENESS

CENTER WIDTH

PANORAMA

ROOM SIZE

DIMENSION

CENTER GAIN CENTER TONE

CENTER ALIGN

SUBWFR LVL

S BACK LVL

INPUT ATT

EFFECT

D EQ 1kHz

2,4
1,7 3,5
23-26RX-D301S[C]_f.p65 05.2.23, 16:2523