22
English
Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN 1/2/3
When you use the digital input terminals, register what
components are connected to which terminals—DIGITAL IN 1/2/3
(see page 11) so that the correct source name will appear when
you select the digital source.
Select one of the following components for each terminal:
DVR/DVD For the DVD player (or DVD recorder).
DBS For the DBS tuner.
VCR For the VCR.
TV For the TV.
Initial setting: DVR/DVD (for “DIGITAL IN 1”)
DBS (for “DIGITAL IN 2”)
VCR (for “DIGITAL IN 3”)
NOTES
• You cannot assign the same component for different terminals.
The priority order for assignment is as follows:
“DIGITAL IN 1” > “DIGITAL IN 2” > “DIGITAL IN 3.”
Ex.: When “DIGITAL IN 1” is set to “DVR/DVD.”
For “DIGITAL IN 2,” “DBS,” “VCR,” and “TV” are selectable.
• In this case, “VCR” is selected.
For “DIGITAL IN 3,” “DBS” and “TV” are selectable.
: Selectable : Not selectable
• Setting “DIGITAL IN 1” affects “DIGITAL IN 2” and “DIGITAL IN
3” settings. When you have changed “DIGITAL IN 1,” confirm the
components assigned to “DIGITAL IN 2” and “DIGITAL IN 3.”
Selecting the component video input
mode—DVD VIDEO IN/VCR VIDEO IN/
DBS VIDEO IN
When you use the component video inputs for connecting the
DVD recorder (or DVD player), VCR, or DBS, register the type of
video input jacks.
If you have not selected appropriate video input jacks, you cannot
view the playback picture on the TV or the AV COMPU LINK
remote control system cannot operate properly (see page 34).
When “<S/C>” is selected for each setting, either composite or
S-video signals is converted into component signals (see page
11).
For the DVD recorder or DVD player (DVD VIDEO IN):
DVD <S/C>Select when connecting the DVD recorder
(or DVD player) to the composite video or S-
video input jacks.
DVD <CMPNT>Select when connecting the DVD recorder
(or DVD player) to the component video
input jacks.
Initial setting: DVD <S/C>
For the VCR (VCR VIDEO IN):
VCR <S/C>Select when connecting the VCR to the
composite video or S-video input jacks.
VCR <CMPNT>Select when connecting the VCR to the
component video input jacks.
Initial setting: VCR <S/C>
For the DBS (DBS VIDEO IN):
DBS <S/C>Select when connecting the DBS to the
composite video or S-video input jacks.
DBS <CMPNT>Select when connecting the DBS to the
component video input jacks.
Initial setting: DBS <S/C>
NOTE
You cannot select “CMPNT” for both the VCR and the DBS at
the same time. If you select “CMPNT” for the VCR, the setting
for the DBS is fixed to “S/C” and vice versa.
Memorizing the volume level for each
source—ONE TOUCH OPE
This receiver memorizes some settings separately for each
source. In addition, you can store the volume level for each source
with the other memorized settings (see page 16).
• This receiver memorizes the volume level
– when you turn off the power, and
– when you change the source.
ONETOUCH<ON>
Select to store the volume level separately for each
source. (The ONE TOUCH OPERATION indicator lights
up on the display.)
ONETOUCH<OFF>
Select this not to store the volume level.
Initial setting: ONETOUCH<OFF>
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume level
for the currently selected source is recalled when the source is
selected.
To cancel the One Touch Operation
Set One Touch Operation to “ONETOUCH<OFF>” so that the
ONE TOUCH OPERATION indicator goes off from the display.
DVR/DVD
DIGITAL IN 1 DBS VCR TV
DIGITAL IN 2
DVR/DVD
DBS VCR TV
DIGITAL IN 3
DVR/DVD
DBS VCR TV
17-22RX-D301S[C]_f.p65 05.3.16, 20:0822