EverFocus ECOR 264-8/4 F2, ECOR 264-8/4 D2 user manual Alarm & Event Setting

4.5ALARM & EVENT SETTING

Figure 4-10is a screenshot of the ALARM & EVENT SETTING MENU. This menu will guide you through alarm and event setup.

Figure 4-10 Alarm & Event Menu - Alarm

4.5.1Alarm

Alarm: Select the alarm input trigger connection number from 1 to 4 (or 8 – one trigger per camera input).

Enable: Check box to enable response to that alarm trigger.

Log: Check box to record these alarm events in the log.

Pre-alarm Record: Check box to start copying recorded video to the hard disk from 5 seconds before the alarm event. (Pre-alarm recording rate will follow the “Normal” frame rate setting)

Buzzer: Check this box to enable the buzzer when an alarm occurs.

Main Monitor: Main monitor display options when a motion occurs. No change: No change on the main monitor display.

Full screen: A full screen of the active camera will display on main monitor. Record: Select which camera(s) will start recording in response to this alarm event.

Email Notify: Check box to enable email notification when an alarm occurs. Email operation requires that valid email settings have been entered in the Network Setting/Email setup screen. (See Section 4.6.2 Email for more information.)

Input Type: This field is to change the type of alarm trigger. N.O.: Normal Open contact.

N.C.: Normal Closed contact.

48