The playback bar will show (see figure below):

1

2

3

4

9

10 11 13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

6

7

8

 

12 10 10

2009/05/25 09:09:30PM

2009/05/25 09:09:40PM

2009/05/25 09:10:30PM

 

 

 

 

 

14

15

16

 

 

 

1.Stop key: press to stop playback

2.Slow Reverse key: press to start slow reverse playback

3.Pause key: press to pause playback

4.Slow Forward key: press to start slow forward playback

5.Fast Reverse key: press to start fast reverse playback

6.Reverse key: press to start reverse playback

7.Forward key: press to start forward playback

8.Fast Forward key: press to start fast forward playback

9.Time bar: Move the slider on the time bar to the select time to playback (The start time and end time for time bar appears below the bar). The status of each camera is represented by different colors on the time bar. Green means normal; orange indicates a Motion; blue indicates Video Loss, red indicates an alarm event.

10.“+” and “-“ signs are used to adjust the time scale range for the bar. Press “+” or “-“ to select between scale levels L1 ~ L5. When changing level, the start time and end time of the time bar will change

L1: Entire time bar is 2 days

L2: Entire time bar is 30 hours.

L3: Entire time bar is 1 hour.

L4: Entire time bar is 10 minutes.

L5: Entire time bar is 1 minute.

11.Express copy: Press to start express copy when camera during playback (only one camera)

12.Playback speed indicator

13.Press “X” to close the playback bar.

14.Start time for bar (the left-most point of the time bar)

15.Current playback time (the time indicated by the slider)

16.End time for time bar (the right-most point of the time bar)

23

Page 29
Image 29
EverFocus ECOR 264-8/4 D2, ECOR 264-8/4 F2 user manual 2009/05/25 090930PM 2009/05/25 090940PM 2009/05/25 091030PM