![](/images/new-backgrounds/1225648/225648131x1.webp)
3.Change the timezone/section to different record mode (which shows a different color) by clicking on the first (numbered) block of any section. The color switches from gray
4.Repeat clicking on the first block (indicated by a sequence number on it) of any timezone, this timezone will change from one color to another, which means switching the record mode. The color switch sequence is
Schedule Setting from front panel
1.Enter schedule setting mode: Select the “Schedule’ icon on the configuration menu and press the ‘Enter’ button; the left hand column will be highlighted in a blue frame. Use the up/down arrows to highlight the ‘Schedule’ choice and press the “Enter” button to enter the schedule setting mode. At this time, the whole editing area at the lower right side will be highlighted within a blue frame. See below image.
2.Enter camera selection mode: Use Up/Down arrow key to switch to Camera selection mode. When Camera selection mode is selected, the list of camera numbers will be highlighted in a blue frame. See below image.
3.Selecting camera: Use Right/Left arrow keys to select desired camera to configure. Selected camera number will be highlighted by a blue frame. See above image.
4.Enter time bar editing mode: Use Up/Down arrow key to switch to time bar editing mode. When this mode is selected, all 9 time bars will be highlighted within a blue frame.
60