EverFocus ECOR 264-8/4 D2 Simple ONE to ONE Connection, Crossover Ethernet Cable Pin outs

3.Router or LAN Connection – A local area network connection requires either a router or a pre- existing LAN connection. This is the most common type of connection. A router allows multiple computers and DVR’s to access each other as well as the Internet. It assigns different internal IP addresses to the computers.

5.7SIMPLE ONE TO ONE CONNECTION

Crossover Ethernet Cable Pin outs:

The Figure below shows the pin configurations for a cross-over cable.

Connection Procedure:

The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never made a cross-over cable. Please remember you can not use a straight through network cable for this application

Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the other into the network card on the back of the computer.

Log into the EverFocus DVR menu and go to the Network Setting Menu.

87