JVC RX-D702B CONTINUED ON THE NEXT PAGE, Button indications on the screen, Usable buttons and their functions, 1 To start the setting, press SETTING

Menu operating procedure

When operating, the on-screen display appears on the TV screen regardless of the SUPERIMPOSE setting (see page 32).

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

In this section, the operation of the remote control is used for explaining.

Ex.: When setting DIGITAL IN 1 terminal.

Operations On the TV screen On the display

1 To start the setting, press SETTING.
						x	ATT
	SETTING	MENU (1)				O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
							HP
The setting item previously selected can be shown	5						MHz
							kHz
on the TV screen by pressing SETTING on the front	SUBWOOFER		:	NO
	FRONT	SPK	: LARGE		The submenu previously
panel when the receiver is in normal operation	CENTER	SPK	: SMALL
					selected appears.
mode.	SURR	SPK	: SMALL
	S BACK	SPK	: SMALL
	S BACK	OUT	:	2SPK
	∞
	:ENTER			:EXIT

The setting item previously selected appears.

2To select the desired submenu, press 5 or ∞ repeatedly.

There are five screens from “SETTING MENU (1)” to “SETTING MENU (5).” To change the screen, simply pressing 5 or ∞ repeatedly. You can go to the next/previous screen.

• On the front panel, turn MULTI JOG.

English

Button indications on the screen

The buttons for operating the menu are shown on the TV screen.You can operate the menu with these buttons.

SETTING	MENU (1)			DIGITAL IN 1
5
SUBWOOFER		:	NO	DIGITAL IN 1 :2DVR/DVD3
FRONT	SPK	: LARGE
CENTER	SPK	: SMALL
SURR	SPK	: SMALL
S BACK	SPK	: SMALL
S BACK	OUT	:	2SPK

∞
:ENTER	:EXIT	23:OPERATE	:BACK
Usable buttons and their functions		Usable buttons and their functions

CONTINUED ON THE NEXT PAGE

27