English

7Adjusting the liveness effect for DSP modes—LIVENESS

This setting is available only when one of the DSP modes (except ALL CH STEREO) is in use. To activate DSP mode, see page 45.

•If “SURROUND SPK” is set to “NO” (see page 28), this item is not adjustable.

•Once you have made an adjustment, it is memorized for each DSP mode.

•You cannot adjust this item directly from the remote control.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting: LIVENESS: 3

As the number increases, the attenuation level of reflections over time decreases so that acoustics change from “Dead” to “Live.” Normally, select “3.”

7Adjusting the panorama control for Pro Logic IIx Music and Pro Logic II Music—PANORAMA

This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 45.

•Once you have made an adjustment, it is memorized until you change the setting.

•You cannot adjust this item directly from the remote control.

PANORAMA: ON Select to add “wraparound” sound effect with side-wall image.

PANORAMA: OFF Select to listen to originally recorded sound.

Initial setting: PANORAMA: OFF

7Adjusting the center channel localization for Pro Logic IIx Music and Pro Logic II Music—CENTER

WIDTH

This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 45.

•If “CENTER SPK” is set to “NO” (see page 28), this item is not adjustable.

•Once you have made an adjustment, it is memorized until you change the setting.

•You cannot adjust this item directly from the remote control.

Adjustable range: OFF and 1 to 7 (in 1 step intervals)

Initial setting: CENTER WIDTH: 3

As the number increases, the center channel sound moves toward the left and right speakers.

Normally, select “3.”

7Adjusting the sound localization position for Pro Logic IIx Music and Pro Logic II Music

—DIMENSION

This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 45.

•Once you have made an adjustment, it is memorized until you change the setting.

•You cannot adjust this item directly from the remote control.

Adjustable range: 1 to 7 (in 1 step intervals)

Initial setting: DIMENSION: 4

As the number increases, the sound localization moves towards forward from backward.

Normally, select “4.”

7Adjusting the sound localization of the center channel—CENTER GAIN

This setting is available only when Neo:6 Music is in use.

•If “CENTER SPK” is set to “NO” (see page 28), this item is not adjustable.

•Once you have made an adjustment, it is memorized until you change the setting.

•You cannot adjust this item directly from the remote control.

Adjustable range: 0 to 1.0 (in 0.1 step intervals)

Initial setting: CENTER GAIN: 0.3

As the number increases, the center channel will be localized clearly.

Normally, select “0.3.”

7Adjusting the center tone—CENTER TONE

This setting is available when one of the Surround/DSP modes is in use. To activate Surround/DSP mode, see page 45.

•If “CENTER SPK” is set to “NO” (see page 28), this item is not adjustable.

•This setting is common to all Surround modes, and is memorized separately for DSP modes.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting: CENTER TONE: 3

As the number increases, the dialogue becomes stronger. Normally, select “3.”

•When the center tone is set to other than “CENTER TONE: 3,” the C.TONE indicator lights up on the display.

From the remote control:

Press C. TONE repeatedly to select the level you want to adjust.

1 2 3

4 5 6

7 8 9

10 0 10

7Aligning the vertical localization of the center channel for Surround/DSP modes

—CNTR ALIGNMENT

This setting is available when one of the Surround/DSP modes (except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and ALL CH STEREO) is in use. To activate Surround/DSP mode, see page 45.

•If “CENTER SPK” is set to “NO” (see page 28), this item is not adjustable.

•Once you have made an adjustment, it is memorized for each Surround/DSP mode.

•You cannot adjust this item directly from the remote control.

CNTR ALIGNMENT: ON Select this when you cannot feel as if the actors or singers are speaking or singing on the screen.

CNTR ALIGNMENT: OFF Center alignment is turned off.

Initial setting: CNTR ALIGNMENT: OFF

38