7To change the transmittable signals for operating other manufacturers’ DBS tuner
Manufactures’ codes for DBS tuner
Manufacturer | Codes |
JVC | 56, 57*, 67 |
English
1. Press and hold
STANDBY/ON DBS.
DBS
STANDBY/ON
VCR TV AUDIO
Amstrad | 43 – 49 |
Blaupunkt | 30 |
Echostar | 50, 51, 67 |
General Instrument | 29 |
Goldstar | 31 |
Grundig | 32, 33 |
2. Press DBS.
TV
TAPE CDR FM/AM
DBS VCR DVD
Hamlin/Re | 01 – 05 |
Hirshmann | 48, 52 – 55 |
Instrument | 68 |
Itt/Nokia | 34 |
Jerrold/G | 06 – 14 |
Kathrein | 52, 58 – 63 |
NEC | 35, 36 |
3. Enter manufacturer’s code using the number buttons (1–9, 0).
See to the right to find the code.
EFFECT CENTER
1 2 3
TEST |
| REAR·L |
4 | 5 | 6 |
SURR ON/OFF |
| REAR·R |
Oak | 15 – 17 |
Orbitech | 48 |
Panasonic | 18 – 20 |
Philips | 37, 38 |
7 8 9
SURR MODE – SUBWOOFER +
10/0 +10
100+
4. Release STANDBY/ON DBS.
You can turn on and off the DBS tuner:
STANDBY/ON DBS : Turns on or off the DBS tuner.
After pressing DBS, you can perform the following operations on a DBS tuner:
TV/DBS CH + or
1 – 9, 0, 100+ : Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0. For channel number 23, press 2, then 3. For channel number 135, press 100+, 3, then 5.
TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.
Note:
•Refer also to the manual supplied for your DBS tuner.
5.Try to operate your DBS tuner by pressing
STANDBY/ON DBS.
When your DBS tuner turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of DBS
tuner, try each one until the correct one is entered.
Pioneer | 21, 22 |
RCA | 65 |
Samsung | 39, 40 |
Schwaiger | 61, 64 |
Scientiff | 23 – 25 |
Siemens | 41, 42 |
Sony | 66 |
Technisat | 48 |
Tocom | 26 |
Zenith | 27, 28 |
*“57” is the initial JVC code.
Note:
•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
62