JVC RX-DV5RSL manual For DVD Player

7For DVD Player

PROBLEM

No picture is displayed on the TV.

No sound is heard and “NO AUDIO” appears on the display.

A disc cannot be played.

A disc cannot be played and “0:00” is displayed on the display window.

Video and audio are distorted.

“MULTI CH” or “L/R ONLY” appears on the display.

The picture does not fit the TV screen

properly.

No subtitle appears on the TV screen though you have selected as your initial subtitle language.

Audio language is different from the one you have selected as your initial audio language.

POSSIBLE CAUSE

The SCART cable is not connected correctly.

TV input selection is incorrect.

The disc is not playable.

The loaded disc may be illegally copied.

The unit’s and disc’s Region Code numbers are incompatible.

Parental Lock is in use.

The disc is loaded with its label and data sides inverted.

The unplayable disc is loaded.

The disc is scratched or dirty.

A VCR is connected between the unit and the TV.

“STILL MODE” may not be set appropriately for the current disc.

The current track prohibits you from playing back with stereo sound.

“MONITOR TYPE” is not set correctly.

The TV is not set correctly.

SOLUTION

Connect the cord correctly (see pages 9 and 10).

Select the correct input on the TV.

Replace the disc (see page 33).

Consult with the disc vendor.

Replace the disc (see page 33).

Enter your password to change the parental level (see pages 59 and 60).

Insert the disc correctly (see page 15).

Replace the disc (see page 33).

Replace or clean the disc (see page 68).

Connect the unit and TV directly.

Select other setting of “STILL MODE” (see page 55).

Activate Surround mode (see page 47) or listen to another track.

Set the monitor type correctly (see page 55).

Set the TV correctly.

Some discs are programed to always display no subtitle initially. If this happens, press SUBTITLE on the remote control after starting play (see page 39).

Some discs are programed to always use the original language initially. If this happens, press AUDIO on the remote control after starting play (see pages 39 and 40).

70