JVC SR-L910EK appendix Setting the weekly timer, Alarm input during timer recording

7	RECORDING
	7-3	Timer Recording
		Daily timer program setting screen
		PROGRAM TIMER
		( DAILY) S T A R T E N D	MODE

1.– – – – – – – : – – – – : – – – – H

2.– – – – – – – : – – – – : – – – – H

3.– – – – – – – : – – – – : – – – – H

4.– – – – – – – : – – – – : – – – – H

5.– – – – – – – : – – – – : – – – – H

6.– – – – – – – : – – – – : – – – – H

7.– – – – – – – : – – – – : – – – – H

8.– – – – – – – : – – – – : – – – – H PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

•Set the cursor arrow to the second line <DAILY> and press the [SET +/- ] button.

Setting the weekly timer

You can program the VCR to record on a specified day each week.

Using the same procedure as in daily timer program setting, select <PROGRAM TIMER> in the main menu to display the timer program setting screen on the monitor. (Refer to steps 1 to 3 in daily timer programming.)

•When the timer program setting screen is displayed,

1the daily timer program setting screen is shown first.

Display the weekly timer program setting screen.

(<WEEKLY> is shown on the second line.)

 Press the [SHIFT +] or [SHIFT -] button to move the

7	RECORDING
	7-3 Timer Recording

[MENU] button		[SHIFT–] button	[RESET/CANCEL] button
		[SHIFT+] button
COUNT/	MENU	SHIFT/TRACKING	RESET
CLOCK			/CANCEL
TIME	TIMER	SET/V.LOCK	AL/PL
MODE	REC		RESET
[TIMER REC] button		[SET+] button
	[SET–] button

	Weekly timer program setting screen
									Stop time (hour)
		Start time (minute)								Stop time (minute)
		Start time (hour)									Record mode
					PROGRAM TIMER
		(WEEKLY) S T A R T E N D MODE
			( MON			)	– – : – –			– – : – –	– – H
			( TUE			)	– – : – –			– – : – –	– – H
Days of the			( WED			)	– – : – –			– – : – –	– – H
			( THU			)	– – : – –			– – : – –	– – H
week			( F R I			)	– – : – –			– – : – –	– – H
			( SAT			)	– – : – –			– – : – –	– – H
(Monday to
			( SUN			)	– – : – –			– – : – –	– – H
Sunday)2
		PRESS (SHIFT,						SET,		RESET)
		PRESS (MENU)							TO	END
						Blinking
,	3				PROGRAM TIMER
		(WEEKLY) S T A R T E N D MODE
			( MON			)	– –	:	– –	– – : – –	– – H
			( TUE			)	– – :		– –	– – : – –	– – H
			( WED			)	– –	:	– –	– – : – –	– – H
			( THU			)	– –	:	– –	– – : – –	– – H
			( F R I			)	– –	:	– –	– – : – –	– – H
			( SAT			)	– –	:	– –	– – : – –	– – H
			( SUN			)	– –	:	– –	– – : – –	– – H
		PRESS (SHIFT,						SET,		RESET)
		PRESS (MENU)							TO	END
4, 5					PROGRAM TIMER
	6
		(WEEKLY) S T A R T E N D MODE
			( MON			)	– 8 :		3 0	1 9 : 3 0	12 H
			( TUE			)	– – :		– –	– – : – –	– – H
			( WED			)	– – :		– –	– – : – –	– – H
			( THU			)	– – :		– –	– – : – –	– – H
			( F R I			)	– – : – –			– – : – –	– – H
			( SAT			)	– – : – –			– – : – –	– – H
			( SUN			)	– – :		– –	– – : – –	– – H
		PRESS (SHIFT,						SET,		RESET)
		PRESS (MENU)							TO	END
					PROGRAM TIMER
		(WEEKLY) S T A R T E N D MODE
			( MON			)	– 8 :		3 0	1 9 : 3 0	12 H
			( TUE			)	– 8 :		3 0	1 9 : 3 0	12 H
			( WED			)	– 8 :		3 0	1 7 : 3 0	– 3 H
			( THU			)	– 8 : 3 0			1 9 : 3 0	– 3 H
			( F R I			)	– 8 : 3 0			2 2 : 3 0	2 4 H
			( SAT			)	1 0 :		0 0	2 2 : 0 0	2 4 H
			( SUN			)	– – : – –			– – : – –	– – H
		PRESS (SHIFT,						SET,		RESET)
		PRESS (MENU)							TO	END
			Timer
				TIMER
						1 6 . 3 0 . 0 0
					VCR's display

		cursor arrow to <DAILY> and press the [SET +] or
		[SET -] button.
2		[The weekly timer program setting screen is shown.
	Select the day of the week you want to record on.
	Press the [SHIFT +] or [SHIFT -] button to set the cursor
	arrow to the day of the week to be set.
	•	Press the [SHIFT +] button to move the cursor arrow
3		down and the [SHIFT -] button to move it up.
	Set the selected day of the week.
	Press the [SET +] or [SET -] button.
	[The selected day of the week blinks.
	•	Press the [SET +] button. The start time (hour) blinks.
4	•	Press the [SET -] button. The record mode blinks.
	1Set the timer.
		Press the [SHIFT +] or [SHIFT -] button until the item
		you want to set starts blinking.
		•	Press the [SHIFT +] button to shift the blinking to
			the right.
		"Start time (hour)" [ "Start time (minute)" [
		"Stop time (hour)" [ "Stop time (minute)"[
		"Record mode" [ Select the next program No.
		•	Press the [SHIFT -] button to move the blinking to
	2		the left.
		Press the [SET +] or [SET -] button to set the value
		for the blinking item.
		•	Press the [SET +] button to increase the value and
			the [SHIFT -] button to decrease it.
	 Set the "Start time (hour)", "Start time (minute)", "Stop
		time (hour)", "Stop time (minute)" and "Record mode"
		with the [SHIFT +/-] and [SET +/-] buttons.
		When all values are set, the set program No. is shown
5		on the VCR's display.
		Accessing another day of the week.
	•	Select the "Record mode" (so that it is blinking) and
		press the [SHIFT +] button. Or, select "Start time" (so
		that it is blinking) and press the [SHIFT -] button.
	[The blinking part stops blinking. You may now select
6		another day of the week.
		To set more than one weekly timer program, repeat
7		steps 2 to 5.
	To end timer programming, press the [MENU] button twice.
	[The normal screen is restored.

Press the [TIMER REC] button.

[The TIMER indication lights in the VCR's display. Power is switched off automatically and the VCR enters the Timer Record Standby mode.

Alarm input during timer recording

•If you wish to allow alarm input during timer recording, turn the function menu switch <TIMER ALARM> to ON. (Factory setting: ON)

•Turn the switch to OFF if you wish to prohibit alarm input.

Canceling timer programming
1	To stop timer programming
Press the [RESET/CANCEL] button.
2The program being set is canceled.
Press the [MENU] button twice.
[The normal screen mode is restored.
1	To cancel a preset timer program
Press the [TIMER REC] button to turn off the TIMER
2indication in the display.
3Turn the VCR and the monitor on.
Press the [MENU] button to display the main menu
screen and select <PROGRAM TIMER> with the [SHIFT
+/-] button. Then, press the [SET +/-] button.
4[The timer program setting screen is displayed.
Press the [SHIFT +/–] button to move the cursor arrow
to the program No. or the day of the week to be
5canceled.
Press the [RESET/CANCEL] button.
6[The specified timer program data is canceled.
Press	the [MENU] button twice.
[The normal screen is restored.

1Changing a preset timer program

Press the [TIMER REC] button to turn off the TIMER 2indication in the display.

3Turn the VCR and the monitor on.

Press the [MENU] button to display the main menu screen and select <PROGRAM TIMER> with the [SHIFT +/-] button. Then, press the [SET +/-] button. 4[The timer program setting screen is displayed.

Press the [SHIFT +/-] button to move the cursor arrow to the program No. or the day of the week to be changed. 5Press the [SET +/-] button.

Select the item to be changed (so that it is blinking) with 6the [SHIFT +/-] button.

7Change the value with the [SHIFT +/-] button.

Press the [MENU] button twice. [The normal screen is restored.

Using the VCR in the Timer Record Standby mode

Press the [TIMER REC] button to turn off the TIMER indication for normal use. Press the [TIMER REC] button again to turn on the TIMER indication. The Timer Record Standby mode is engaged. When all timer recording programs have been executed, the TIMER indication goes off.

30 31