JVC SR-L910E, SR-L910EK

1 2 : 3 0 : 4 5 3 H

1 1 – 6 – 9 8

3 H 1 2 : 3 0 : 4 5

1 1 – 6 – 9 8

1 2 : 3 0 : 4 5

3 H 1 1 – 6 – 9 8

1 2 : 3 0 : 4 5

1 1 – 6 – 9 8 3 H

4 MONITOR ON-SCREEN DISPLAY

Status information and other data including date/time, alarm input data, power loss (power failure) data and total operation

hours can be displayed on a connected monitor. Function settings can be switched via the on-screen function menu switches

and menu screens are also provided for timer recording program setting and date/time setting.

•Normally, the time/date data is shown on screen.

•Additional data displays and menu screens can be displayed by pressing the [MENU] button. This calls up the main menu

screen where you can select items as desired.

4-1 On-Screen Display in the Time/Date and Record Modes

Time/date and recording mode data is recorded and displayed on screen.

In the Stop, Record and Record Pause modes, data is superimposed on the input video signals.

•The on-screen display can switched ON/OFF using the <POSITION> switch in the function menu's ON SCREEN MODE

setting screen. You can also change the on-screen display position using this switch.

Menu switch

<POSITION> setting

Display

5Connect the VCR's video output connector to the

monitor's video input connector.

Turn the power on (monitor and VCR) and engage the

Stop mode.

•When a video signal is input to the video input

connector, time/date, and recording mode are

superimposed on the picture.

•If there is no signal input, display data is

superimposed on a black background.

*If the date and time have not been set, correct date

and time indications are not available.

5If no on-screen data is displayed, set the <POSITION>

menu switch in the function menu's ON SCREEN MODE

setting screen to the desired position (except "OFF").

5Changing the display position

You can select the position on screen where data is

displayed with the <POSITION> menu switch in the ON

SCREEN MODE setting screen. Data can be displayed

in any one of the four corners of the screen.

Setting of the menu switch <POSITION>

–L-UP :Left top (factory setting)

–R-UP :Right top

–R-BOTTOM: Right bottom

–L-BOTTOM : Left bottom

–OFF : Display is off. No indications are

shown.

●For "Function menu switch setting", refer to page 19.

•In the Record mode, on-screen time/date and

recording mode data is recorded together with video

signals.

If you do not want to record on-screen data, set the

<POSITION> menu switch to "OFF".

•In the Play mode, on-screen data recorded on the tape

is displayed.

• "L-UP"

• "R-UP"

Minute

Hour

Recording mode

Month

Second

• "R-BOTTOM"

• "L-BOTTOM"

Day

Year (last two digits)

Recording mode

PAL

COUNT/

CLOCK

TIME

MODE

TIMER

REC

AL/PL

RESET

VIDEO CASSETTE RECORDER

SHIFT/TRACKING

SET/V.LOCK

RESET

/CANCEL

OPERATE

SR-L910E

OPE. LOCK

Operation

5Connect the VCR's video output connector to the

monitor's video input connector.

Turn on the VCR and the monitor. Make sure the Stop

mode is engaged.

Press the [MENU] button.

[The main menu screen is displayed.

Press the [SHIFT +/-] button to move the cursor arrow to

the item you want to display.

•Press the [SHIFT +] button to move the cursor arrow

down. Press the [SHIFT -] button to move it up.

Press the [SET +] or [SET -] button to display the

selected item.

To end menu operation and restore the normal screen,

press the [MENU] button.

•When the [MENU] button is pressed during playback,

the monitor screen display switches from theplayback

picture to the input video signal (EE picture) and the

main menu is shown on the screen.

This means that even during playback you can check

menu contents. Press the [MENU] button again to

restore the playback picture.

4-2 Main Menu Display

You can display date and time data recorded when an alarm input or power failure occurs, as well as the hour meter (drum

rotating time) by selecting the desired item in the main menu.

The timer recording program setting screen, function menu switch setting screen, and date/time setting screen can also be

displayed by selecting the desired item in the main menu.

●PROGRAM TIMER:

Displays the program setting screen for timer recording.

*Timer programming is not possible if the date and

time are not set. In this case, the date/time setting

screen will be displayed.

●FUNCTION:

Displays the function menu setting screen.

●ALARM IN:

Displays the date and time when an alarm signal was

input.

●POWER LOSS

Displays the date and time when a power failure

occurred.

●HOUR METER:

Displays the hour meter (drum rotating time).

●CLOCK ADJUST:

Displays the date/time setting screen.

*Set the date and time before using this unit.

MAIN MENU

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

PRESS (SHIFT, SET)

PRESS (MENU) TO END

4 MONITOR ON-SCREEN DISPLAY

[SHIFT +/–] buttons

[MENU] button

[SET +/–] buttons

Main menu screen