Program Dubbing (From DVD to VCR) | 1 Load a disc you want to dub on the DVD deck, and a cassette | |||
with the record safety tab intact on the VCR deck. | ||||
Dubbing The Desired Programs On A Disc | 2 Press VCR}DVD to select the dubbing direction. The dubbing | |||
(DUBB.) lamp lights up on the unit. | ||||
You can select and dub your desired programs on a DVD disc to | 3 Prepare the DVD deck for dubbing. | |||
the tape. |
|
| A Press VCR/DVD repeatedly so that the DVD lamp lights up on | |
|
| the unit. | ||
|
|
| ||
● Turn on the unit. |
|
| B Press NAVIGATION to access the Library Database DVD Navi | |
|
| screen. | ||
● Turn on the TV and select the AV mode. | ||||
● Slide the TV/CABLE/DBS/DVD switch to DVD. | C Press rt w e to select “ORIGINAL”, then press ENTER. | |||
|
|
| D Press w e to select the desired program, then press MEMO. | |
|
| REC | ● Select the programs in the order that you want them to be dub. The | |
|
| numbers of the playback order appear on the index. You can select | ||
|
| VCR/DVD MODE DUBB. VCR } DVD | ||
|
|
| up to 30 programs. | |
|
|
| ● If you have specified a wrong selection, press MEMO. The number | |
|
|
| disappears. | |
|
|
| ● When you want to clear all the numbers, press CLEAR (8). | |
|
|
| 4 Press 4 to locate the point where you want dubbing to start, | |
|
|
| then press 9 to pause playback. | |
|
|
| 5 Prepare the VCR deck for dubbing. | |
DUBB. Lamp | U 9 7 | A Press VCR/DVD repeatedly so that the VCR lamp lights up on | ||
|
|
| the unit. | |
|
|
| B Press REC MODE repeatedly to set the recording mode. | |
VCR/DVD |
|
| ||
1 | 2 | 3 | C Press 7 and 9 simultaneously so that the VCR deck enters the | |
Record Pause mode. | ||||
4 | 5 | 6 | ||
7 | 8 | 9 | 6 Press and hold DUBB. for more than 2 seconds to start the | |
| 0 | MEMO | ||
|
|
| dubbing. The dubbing (DUBB.) lamp blinks on the unit. |
NAVIGATION |
|
ENTER | rtw e |
|
4
CLEAR (8) 9
REC MODE 7
●Playback on the DVD deck and recording on the VCR deck starts at the same time.
●When all the selected programs have been dubbed, playback on the DVD deck and recording on the VCR deck stops automatically at the same time. Press VCR}DVD to turn off the dubbing (DUBB.) lamp.
NOTES:
●The program memory remains even after dubbing is completed. To clear the memory, access the Library Database DVD Navi screen and press CLEAR (8).
●When locating the point where you want dubbing to start, be sure to press 4 then press 9. There should be at least a
●If you do not want the superimposed indication to be recorded, set “SUPERIMPOSE” to “OFF” before dubbing. ( pg. 59)